Re: Jack Wabbit
I've done the same, with a cheap little 5 volt transformer that
powers over 20 turnouts via DBDT micro switches. In the interest
of simplicity, I arranged all of the micro switches so that a
throw to the right indicates "straight-through" and a throw to the
left indicates "diverging," eliminating the need for any red/green
On 1/28/19 9:55 PM, Rich Randall via Groups.Io wrote:
I use a separate DC power source (bus) for my tortoise controls. The power goes to the toggle switch or other selector to drive the tortoise pins 1 and 8 one way or the other. If you want to use track power, you have to rectify it with diodes and set up some clever toggle arrangement. DCC simply acts like AC power. I think the voltage is too high for a tortoise, so use resistors to knock it down.