Re: N scale Peco code 55 turnouts
John Johnston <towboatjohnston@...>
toggle quoted messageShow quoted text
I also use Peco code 55 (Electrofrog) turnouts, and have a similar number to you. I haven’t got Frog Juicers on all of them yet, but I have not had any problems so far with them being detected as a short. With that many, I assume you will be using Hex juicers, which test each of their six circuits in sequence, instead of all at once. I also have my layout divided into blocks, which also may help, but it would take a lot of Juicers to add up to one sound card.
Regarding the Steadman method, I’m not sure it is necessary. I started with no Juicers, and no other power routing mechanisms except the contact between the point rail and the stock rail. I had surprisingly few problems as long as I kept my track impeccably clean. But a few turnouts in yards give trouble, and I presume the number will increase as things age and oxidize. I have started adding juicers simply by soldering a single lead to the jumper wire that connects all parts of the frog. I have not made any cuts, and have not encountered any problems yet. I may be blissfully unaware of an impending disaster, but so far everything has worked flawlessly. I did have to remove lightbulbs, and to make sure that the juicers were powered from the same block as the rest of the turnout.
From: email@example.com <firstname.lastname@example.org> On Behalf Of Perry A Pollino
I am using Peco code 55 turnouts.