Re: Wiring Bi-color LED's
toggle quoted messageShow quoted text
Isn’t a resistor needed to knock down the 12 volts given the LED’s show voltage of 2 – 2.5 V?
Am I missing something here?
Business Information Systems, Inc.
P.O. Box 160396
Boiling Springs, SC 29316
From: email@example.com <firstname.lastname@example.org> On Behalf Of Richard Gagnon via Groups.Io
Sent: Saturday, October 13, 2018 4:11 PM
Subject: Re: [w4dccqa] Wiring Bi-color LED's
I put a two lead red/green 3mm, two lead LED in series with one tortoise lead. The tortoise draws almost 20 ma. at stall. Most LED’s are needed. No resistors needed.
On Saturday, October 13, 2018, 11:21 AM, Tom Anderson <tanderson@...> wrote:
ExchangeDefender Message Security: Check Authenticity