toggle quoted messageShow quoted text
I put a two lead red/green 3mm, two lead LED in series with one tortoise lead. The tortoise draws almost 20 ma. at stall. Most LED’s are needed. No resistors needed.
On Saturday, October 13, 2018, 11:21 AM, Tom Anderson <tanderson@...> wrote:
I am installing Tortoise machines on my layout and will start a panel using DPDT switches to change the turnout position. I would like to add bi-color led's (red/green) to the panel and power them using the contacts on the Tortoise. Could someone show me a simple way to wire these.
LED's have the following specifications:
Forward voltage (R/G): 2.0/2.2 Max: 2.5/2.6
Reverse voltage: 5.0
Peak forward current: 150mA
Steady Current: 25mA
Given that the Tortoise uses 12V, I am assuming that I need resistors to not damage the LED but I don't know what value or how many are needed.
Any help would be greatly appreciated! I have very little experience doing this.