Re: Dead track area dcc

John Cahill
 

Ditto but mine was caused by the track being hit with a pin hammer on one side causing it to dip and then lose contact when certain locos entered the section.  Had to replace damaged section.
John

On Mon, Jun 25, 2018 at 12:19 PM, JerryG via Groups.Io <jerryg2003@...> wrote:
I had a similar problem once, near the middle of a three-way turn out.  It seems that the rails were slightly wider than standard as they curved and sometimes engines lost power going through even though all my frogs were powered.  Spiking the rails into alignment solved the problem.

Jerry
________________________________________________
jerryg2003@...

Join w4dccqa@groups.io to automatically receive all group messages.