Re: NCE 4pin connector

Glenn
 

RJ9, RJ10, or RJ22

"" The 4P4C connector is the standard modular connector used on both ends of telephone handset cords, and is therefore often called a handset connector.

This handset connector is not a registered jack, because it was not intended to connect directly to the telephone lines. However it is often referred to as RJ9, RJ10, or RJ22. ""

Note: From experience The coil cord telephone handset cord will not work with NCE.

Handset wiring

Wiring diagram of 4P4C/RJ9 connector in telephone handset cord.



-----Original Message-----
From: "Affordable Roofing Contractors vmarino2009@... [WiringForDCC]"
Sent: Mar 27, 2018 7:48 PM
To: WiringForDCC@...
Subject: [WiringForDCC] NCE 4pin connector



Does anyone know the exact name of the 4pin control bus plug for NCE?   I bought a bag of RJ11 and they are way large than the NCE connector. 

Sincerely,
Vincent Marino
Vincent Marino
Affordable Roofing Contractors
Project Manager
904-260-7663 office
904-683-2914 fax
904-449-6339  mobile
www.bestaffordablecontractors.com 
 
The information contained in this message is proprietary and/or confidential. If you are not the intended recipient, please: (i) delete the message and all copies; (ii) do not disclose, distribute or use the message in any manner; and (iii) notify the sender immediately..


Join w4dccqa@groups.io to automatically receive all group messages.