|
Well I did it again
Sorry missed the Tuesday night net, I turned my radio on at 20:58 and waited for the net, stepped out for a minute came back and sat down, before I knew it was 15 after. And I knew as quick as our
Sorry missed the Tuesday night net, I turned my radio on at 20:58 and waited for the net, stepped out for a minute came back and sat down, before I knew it was 15 after. And I knew as quick as our
|
By
Darrin Lewis
·
#205
·
|
|
Interference
Well, I seem to have a problem at my home QTH with broadband interference. It happens as a burst, for 12-15 seconds, then ceases for approximately the same time. It's a regular cycle/interval. What I
Well, I seem to have a problem at my home QTH with broadband interference. It happens as a burst, for 12-15 seconds, then ceases for approximately the same time. It's a regular cycle/interval. What I
|
By
Al Ardon (N9UO)
·
#204
·
|
|
SIREN net
All members:
Thursday evening at 5:30 PM will be the monthly siren test for the City of Kearney
Where ever you are at PLEASE check in on 147.315 or 444.625 and report what
you heard and where you are
All members:
Thursday evening at 5:30 PM will be the monthly siren test for the City of Kearney
Where ever you are at PLEASE check in on 147.315 or 444.625 and report what
you heard and where you are
|
By
Jan Parker
·
#203
·
|
|
Re: Easy Fox Hunting Antenna Build (and spare materials available if someone else wants to build one)
#project
That looks slick!
By
Ben S
·
#202
·
|
|
Re: Easy Fox Hunting Antenna Build (and spare materials available if someone else wants to build one)
#project
Little update and some pics!
I got the offset attenuator built and installed. I got a PVC conduit body and installed the attenuator, battery, and switch into that, and used it to mount a handle as
Little update and some pics!
I got the offset attenuator built and installed. I got a PVC conduit body and installed the attenuator, battery, and switch into that, and used it to mount a handle as
|
By
Michael Forsman (KEØTCF)
·
#201
·
Edited
|
|
Tuesday NET
---------- Forwarded message ---------
From: Jan Parker <janparker6550@...>
Date: Tue, Aug 3, 2021 at 6:13 AM
Subject: Tuesday NET
To: <w0py@groups.io>
Welcome to August 3, 2021.....and school starts
---------- Forwarded message ---------
From: Jan Parker <janparker6550@...>
Date: Tue, Aug 3, 2021 at 6:13 AM
Subject: Tuesday NET
To: <w0py@groups.io>
Welcome to August 3, 2021.....and school starts
|
By
Jan Parker
·
#200
·
|
|
Delivery Status Notification (Failure)
---------- Forwarded message ---------
From: Mail Delivery Subsystem <mailer-daemon@...>
Date: Tue, Aug 3, 2021 at 6:14 AM
Subject: Delivery Status Notification (Failure)
To:
---------- Forwarded message ---------
From: Mail Delivery Subsystem <mailer-daemon@...>
Date: Tue, Aug 3, 2021 at 6:14 AM
Subject: Delivery Status Notification (Failure)
To:
|
By
Jan Parker
·
#199
·
|
|
Re: 147.000 repeater
Thanks—good to hear.
And my request still stands to make the squelch tail a reasonable length: at 50 milliseconds it’s useless and might as well not be on there.
Until next time…
--
Mike
Thanks—good to hear.
And my request still stands to make the squelch tail a reasonable length: at 50 milliseconds it’s useless and might as well not be on there.
Until next time…
--
Mike
|
By
Mike Osterberg
·
#198
·
|
|
Re: 147.000 repeater
Thank you Darrin.
Timothy
From: w0ky@groups.io <w0ky@groups.io>On Behalf Of Darrin Lewis
Sent: Monday, August 2, 2021 1:08 PM
To: w0ky@groups.io
Subject: [w0ky] 147.000 repeater
FYI as of
Thank you Darrin.
Timothy
From: w0ky@groups.io <w0ky@groups.io>On Behalf Of Darrin Lewis
Sent: Monday, August 2, 2021 1:08 PM
To: w0ky@groups.io
Subject: [w0ky] 147.000 repeater
FYI as of
|
By
Timothy Loewenstein OOTB SME - (877) 237-0000
·
#197
·
|
|
147.000 repeater
FYI as of 10:00 am this morning the 147.000 repeater has been disconnected and off the air. (temporally)
The repeater has been removed for maintenance, testing and repair if needed. When completed
FYI as of 10:00 am this morning the 147.000 repeater has been disconnected and off the air. (temporally)
The repeater has been removed for maintenance, testing and repair if needed. When completed
|
By
Darrin Lewis
·
#196
·
|
|
Re: My Hamshack Situation
Hi Steven,
I'd love to help if I can with the installation, but unfortunately I'm so busy lately I don't know if I'll be able to. As for advice on setup and all, I wish I could be more help but I'm
Hi Steven,
I'd love to help if I can with the installation, but unfortunately I'm so busy lately I don't know if I'll be able to. As for advice on setup and all, I wish I could be more help but I'm
|
By
Michael Forsman (KEØTCF)
·
#195
·
Edited
|
|
Re: My Hamshack Situation
It will be interesting about the responses you will get.
I would stay off of Amazon and support a "HAM" shop. You will get better support.
Why are you buying an out of band Tram?
NI0P
Brian
It will be interesting about the responses you will get.
I would stay off of Amazon and support a "HAM" shop. You will get better support.
Why are you buying an out of band Tram?
NI0P
Brian
|
By
Brian T Schmidt
·
#194
·
|
|
My Hamshack Situation
All you all know I have mentioned I am needing input to get my shack (my antennas mainly) off the ground! - quite literally! I have attached my overall gear list and what I would like to accomplish.
All you all know I have mentioned I am needing input to get my shack (my antennas mainly) off the ground! - quite literally! I have attached my overall gear list and what I would like to accomplish.
|
By
Steven Dahl
·
#193
·
|
|
Easy Fox Hunting Antenna Build (and spare materials available if someone else wants to build one)
#project
So, when I was out at Bader Park last weekend for the big Steak Fry event, (which by the way, was an absolute blast and I am so glad I was able to attend!) they held a fox hunt event. I participated
So, when I was out at Bader Park last weekend for the big Steak Fry event, (which by the way, was an absolute blast and I am so glad I was able to attend!) they held a fox hunt event. I participated
|
By
Michael Forsman (KEØTCF)
·
#192
·
|
|
Possible Extended Website Outtage
#website
Hi all,
I don't anticipate this being a major issue, but the club site might be out for a few hours tonight. I am moving my home office to a different room and as such, the server and all networking
Hi all,
I don't anticipate this being a major issue, but the club site might be out for a few hours tonight. I am moving my home office to a different room and as such, the server and all networking
|
By
Michael Forsman (KEØTCF)
·
#191
·
|
|
From Rich KØWLS on his merchandise
People can call me. 402-350-0629. I will try to work with them on price or adding something extra to go along with the Omni or the Drakes.
SELLING THE HF RIGS ARE MY MOST IMPORTANT CONCERNS. Other
People can call me. 402-350-0629. I will try to work with them on price or adding something extra to go along with the Omni or the Drakes.
SELLING THE HF RIGS ARE MY MOST IMPORTANT CONCERNS. Other
|
By
Mike Osterberg
·
#190
·
|
|
Re: K0WLS
I would also like to see a list of the inventory and the prices, i might want to get a ham for traveling/setting up at parks when i have my licenses. Please and Thank you.
I would also like to see a list of the inventory and the prices, i might want to get a ham for traveling/setting up at parks when i have my licenses. Please and Thank you.
|
By
Zander Mais
·
#189
·
|
|
Re: K0WLS
Do you know anything about any of this stuff?
Is there an inventory &/or a price kist available?
Let me know , please......
Jan
Do you know anything about any of this stuff?
Is there an inventory &/or a price kist available?
Let me know , please......
Jan
|
By
Jan Parker
·
#188
·
|
|
K0WLS
Good morning, Crew.
This is from Rich in Grand Island and it looks like he’s cleaning house before moving.
Take a look at the attached video catalog and let’s see what we can do to help him out.
Good morning, Crew.
This is from Rich in Grand Island and it looks like he’s cleaning house before moving.
Take a look at the attached video catalog and let’s see what we can do to help him out.
|
By
Mike Osterberg
·
#187
·
|
|
Re: Tuesday night NET
Thanks Jan
By
House RN
·
#186
·
|