Date   
HRD needs refresh after logging .

f1vev@...
 

Hello,


Firstly thank you for the program, I was previously logging through ADIF etc.from both JT alert and 647 HRD.

I  installed it yesterday and  it all works  perfectly  no hiccups etc. simple abd first time..

I have two very minor observations,  which are no way problematic,

When the QSO is logged into HRD it will not show until the HRD " refresh" buton is hit.

Secondly,  the other columns  such as Lotw  sent and QSL card sent are still not populated to No even after " refresh" but need  to only when contact is " viewed" the F7 Updated.?

Wondering if this  "normal" or if I missed something.

Thanks again  Jacques


--
Ic 7300 -  Win 10 Pro  - WJSTX 1.7 - JTalert 2.94 -  HRD 6.4.647 - Maria dB  : all latest updates

Re: Contact was not logged in QSORelay SQLite database

snack@...
 

Hi Bruce
Before sync database is empty like it should, after sync i have all QSO from HRD logbook. In both situations i can use delete command, when i have contacs from HRD it also deletes them. After resync its back again what i deleted, not sure should it do that way.

Teamviever is ok to me. Our time difference is about 8 hours so i think weekend when i am not at work is fine

- Mikko

Re: Contact was not logged in QSORelay SQLite database

r8kah@...
 

I have exactly same problem on Windows 10. R8KAH, Oleg

Re: Contact was not logged in QSORelay SQLite database

Bruce VK2RT
 

Hi Mikko, from your images everything seems to be setup correctly. You said before that you successfully ran "Synchronise Databases", can you select "Delete a Contact" and show me what is shown in that dialog, I expect it will be empty. We may need to schedule a time and use Teamviewer to access your PC and see what's going on. Teamviewer is available at https://www.teamviewer.com/en/ DE Bruce VK2RT

Re: Frequency Error

Chris VK2BYI
 

Hi Clovis,

I am glad to hear that you have resolved the issue.

However, we have a fix in place to handle the comma as well as a full stop in the next release.  So you will be able to revert to the comma at that time if you prefer.

We will announce it in this forum when the next release is ready.

73 Chris
VK2BYI

Re: Contact was not logged in QSORelay SQLite database

snack@...
 

Hi,

I tested with default foldes, but still same error

OH8EJW, Mikko

Re: Not logged error

Hank W6IR
 

Thanks Chris. I think you nailed it in both the software and the problem. For now I'll just close the error window.

73 Hank

W6IR

Re: Frequency Error

py3og@...
 

Yes Bruce!


This is an issue with Windows Regional Settings. I have changed the comma "," for  a point "." and all is ok now.


Many thanks!


73, Clovis- PY3OG

Re: Contact was not logged in QSORelay SQLite database

snack@...
 
Edited

Hi Bruce

I tried first default locations and sympthon was same. Documents folder was the last test to change location to avoid permmission problems, but it not helped. I can retry with default locations later in this day

OH8EJW, Mikko

New to this group Install questions

Bob Davet
 

Chris:

Checked the sort thing you mentioned. They still are not showing up.

Here are the files you requested.

I am a Firefighter/Paramedic. Will be leaving for my 24hr shift in a few minutes.

If you reply in the next 24hrs I will not be able to do anything till I get home on Thursday am.


Thanks


Bob

W8RID

Re: Not logged error

Chris VK2BYI
 

Hi Luca,

If you are receiving the following popup, then I believe that is being caused by QSO Relay checking HRD Logbook too soon after sending a contact to be logged, and HRD Logbook hasn't had enough time to add the new row to its database:


If so, this will be fixed as soon as possible.

The JTAlertX Automatically send a second logging request if the first fails setting only applies to JTAlertX checking that the QSO was received by QSO Relay which is earlier in the sequence of events and not related - although it is similar in nature.

73 Chris
VK2BYI

Re: Not logged error

Luca Nerva
 

I have also a popup... this evening I try to disable Automatically send a second logging request if the first fails" ? 
I use win7 and mariadb....

Tnx for great work


73 de IW1FZR Luke

Il 03 Mag 2017 6:55 AM, "Chris" <chris@...> ha scritto:

Hi Hank,

QSO Relay may be checking too soon after forwarding a QSO to HRD Logbook.  So we will have to put a short delay and a retry when trying to verify if the HRD Logbook actually logged the contact,

This will be added as soon as possible.

73 Chris
VK2BYI

Re: Not logged error

Chris VK2BYI
 

Hi Hank,

QSO Relay may be checking too soon after forwarding a QSO to HRD Logbook.  So we will have to put a short delay and a retry when trying to verify if the HRD Logbook actually logged the contact,

This will be added as soon as possible.

73 Chris
VK2BYI

Re: Contact was not logged in QSORelay SQLite database

Bruce VK2RT
 

Hi Mikko,

When you created the QSORelay.SQLite database file, it would have been located in the AppData/Roaming/VK2BYI/QSORelay folder, did you copy that file to the folder C:\Users\Documents\QSORelay ?

Make sure the QSORelay.SQLite file is located where you are pointing to it.

It should not matter where you have the QSORelay.SQLite file located but try creating a new QSORelay.SQLite file where it wants to create by default in the Roaming area and then select it there and also point to it there in JTAlertX.

DE Bruce

VK2RT

moderated Re: New to this group, install questions

Chris VK2BYI
 

Hi Bob,

They may be there.  You can re-sort the rows in the grid by clicking on the column headings - so if you click on QsoDate it will re-sort by date in one direction, and clicking again it will sort in the other direction.  That might help in finding them in the grid, but you may have already figured this out and they are missing.

It is already on our road map to add a search facility and row count to this dialog which will be in the next release.  You will then be able to more easily confirm if the sync brought all rows down from HRD to QSO Relay.

In the meantime, would you mind zipping up your HRD Access MDB file and emailing it to me, so I can try and reproduce the issue here?  I will keep your log private and destroy it afterwards.

Also, you could look in the AppData folder for the application - C:\Users\<your username>\AppData\Roaming\VK2BYI\QSORelay, and see if any exceptions have occurred during the sync.  If there is an exception log there (Exception yyyy-mm-dd.log), can you send it to me as well?

If the AppData folder is not visible in Windows explorer, you will have to select the Hidden Items control to make it become visible:


73 Chris
VK2BYI

Contact was not logged in QSORelay SQLite database

snack@...
 

Greetings from Finland

First thank you so much that finally we have solution use HRD6 with jtalertx, many of the JTDX users with jtalertx have get this work but some how i just can get this work. Tried with two different PC:s one with Windows 7 and one with Windows 10. I have disabled firewall, uninstalled, reinstalled, checking my settings many times but still when i try log a QSO i got "Contact was not logged in QSORelay SQLitedatabase"

I just not understand what is wrong or what i do wrong because i got same error with two different computers as i said. Only what works to me is Sync with sqlite file and HRD logbook

Sqlite file is 36KB when i create it, sync with HDR works fine no problem, but when i try log a QSO i got error. Please look attachments my pics from my settings. I would appreciate it if someone could help me and show me where i do mistake or wrong or do i have missed something

Best regards
OH8EJW, Mikko

Re: Frequency Error

Bruce VK2RT
 

Thanks for the feedback Clovis

This may be an issue with Windows Regional Settings where a comma "," is being used as the Mhz separator as shown in the WSJT-X frequency window. In our case the Windows Regional Setting is a dot ".".

We are currently investigating this issue now Clovis.


DE Bruce VK2RT


Re: More on Synchronizing DB

Chris VK2BYI
 

Hi Morris,

Each time the sync process is run, QSO Relay has to compare all rows in both databases to determine the necessary changes to be made in the QSO Relay DB, so it still may take a significant amount time to sync on the next attempt.

It is possible that another process such as antivirus scanning software or Microsoft's Compatibility Telemetry service could have been running at the same as the sync and caused high disk I/O utilization, and your next scan might be a lot quicker, but with 23000 rows it may not.

It is more than obvious that I need to improve the performance of the sync process, so this will get my immediate attention and I hope I can make some substantial improvements in the coming days.  I am sorry, but you will have to bear with the slow grind in the meantime.

73 Chris
VK2BYI

Re: Not logged error

Bruce VK2RT
 

Check Settings in JTAlertX

Logging -> Log4OM

Do you have the option ticked "Automatically send a second logging request if the first fails" ?

Bruce VK2RT

Not logged error

Hank W6IR
 

I'm getting a popup box every log attempt that says the QSO wasn't logged to HRD yet the QSO does show up in HRD.

Anyone with ideas?

Hank W6IR