Date   
Re: Not logged error

Luca Nerva
 

I have also a popup... this evening I try to disable Automatically send a second logging request if the first fails" ? 
I use win7 and mariadb....

Tnx for great work


73 de IW1FZR Luke

Il 03 Mag 2017 6:55 AM, "Chris" <chris@...> ha scritto:

Hi Hank,

QSO Relay may be checking too soon after forwarding a QSO to HRD Logbook.  So we will have to put a short delay and a retry when trying to verify if the HRD Logbook actually logged the contact,

This will be added as soon as possible.

73 Chris
VK2BYI

Re: Not logged error

Chris VK2BYI
 

Hi Luca,

If you are receiving the following popup, then I believe that is being caused by QSO Relay checking HRD Logbook too soon after sending a contact to be logged, and HRD Logbook hasn't had enough time to add the new row to its database:


If so, this will be fixed as soon as possible.

The JTAlertX Automatically send a second logging request if the first fails setting only applies to JTAlertX checking that the QSO was received by QSO Relay which is earlier in the sequence of events and not related - although it is similar in nature.

73 Chris
VK2BYI

New to this group Install questions

Bob Davet
 

Chris:

Checked the sort thing you mentioned. They still are not showing up.

Here are the files you requested.

I am a Firefighter/Paramedic. Will be leaving for my 24hr shift in a few minutes.

If you reply in the next 24hrs I will not be able to do anything till I get home on Thursday am.


Thanks


Bob

W8RID

Re: Contact was not logged in QSORelay SQLite database

snack@...
 
Edited

Hi Bruce

I tried first default locations and sympthon was same. Documents folder was the last test to change location to avoid permmission problems, but it not helped. I can retry with default locations later in this day

OH8EJW, Mikko

Re: Frequency Error

py3og@...
 

Yes Bruce!


This is an issue with Windows Regional Settings. I have changed the comma "," for  a point "." and all is ok now.


Many thanks!


73, Clovis- PY3OG

Re: Not logged error

Hank W6IR
 

Thanks Chris. I think you nailed it in both the software and the problem. For now I'll just close the error window.

73 Hank

W6IR

Re: Contact was not logged in QSORelay SQLite database

snack@...
 

Hi,

I tested with default foldes, but still same error

OH8EJW, Mikko

Re: Frequency Error

Chris VK2BYI
 

Hi Clovis,

I am glad to hear that you have resolved the issue.

However, we have a fix in place to handle the comma as well as a full stop in the next release.  So you will be able to revert to the comma at that time if you prefer.

We will announce it in this forum when the next release is ready.

73 Chris
VK2BYI

Re: Contact was not logged in QSORelay SQLite database

Bruce VK2RT
 

Hi Mikko, from your images everything seems to be setup correctly. You said before that you successfully ran "Synchronise Databases", can you select "Delete a Contact" and show me what is shown in that dialog, I expect it will be empty. We may need to schedule a time and use Teamviewer to access your PC and see what's going on. Teamviewer is available at https://www.teamviewer.com/en/ DE Bruce VK2RT

Re: Contact was not logged in QSORelay SQLite database

r8kah@...
 

I have exactly same problem on Windows 10. R8KAH, Oleg

Re: Contact was not logged in QSORelay SQLite database

snack@...
 

Hi Bruce
Before sync database is empty like it should, after sync i have all QSO from HRD logbook. In both situations i can use delete command, when i have contacs from HRD it also deletes them. After resync its back again what i deleted, not sure should it do that way.

Teamviever is ok to me. Our time difference is about 8 hours so i think weekend when i am not at work is fine

- Mikko

HRD needs refresh after logging .

f1vev@...
 

Hello,


Firstly thank you for the program, I was previously logging through ADIF etc.from both JT alert and 647 HRD.

I  installed it yesterday and  it all works  perfectly  no hiccups etc. simple abd first time..

I have two very minor observations,  which are no way problematic,

When the QSO is logged into HRD it will not show until the HRD " refresh" buton is hit.

Secondly,  the other columns  such as Lotw  sent and QSL card sent are still not populated to No even after " refresh" but need  to only when contact is " viewed" the F7 Updated.?

Wondering if this  "normal" or if I missed something.

Thanks again  Jacques


--
Ic 7300 -  Win 10 Pro  - WJSTX 1.7 - JTalert 2.94 -  HRD 6.4.647 - Maria dB  : all latest updates

Re: Contact was not logged in QSORelay SQLite database

Bruce VK2RT
 

Hi Mikko The sync is working fine, the SQLite database mirrors the HRD Logbook database. If you remove an entry from the SQLite database it will return after the next sync. If you want an entry totally removed, remove it from HRD and after a sync it will be removed from the SQLite database (or remove from both). OK on Teamviewer, yes we can arrange a time over the weekend Mikko. I will send you an email. DE Bruce VK2RT

Re: Contact was not logged in QSORelay SQLite database

r8kah@...
 

Bruce, can you access my PC use Teamviewer? Send me your email for id and password. Thanks. R8KAH, Oleg r8kah@...

QSO Relay

Arnolds Preiss
 

 

Hello Bruce,

I am YL2CA, I have same problem as Mikko – QSO did not logged in HRD logbook but logged in QRZ.com c/o HRD logbook options, all settings are as in Mikko pictures, maybe my HRD options are wrong?

Here is message from QSO Relay folder after traying log QSO:

 

2017-05-04 10:16:54.2850 ERROR System.FormatException: Input string was not in a correct format.

   at System.Number.ParseDouble(String value, NumberStyles options, NumberFormatInfo numfmt)

   at QSORelay.Entities.SqliteLogbook.BuildInsertStatement(Dictionary`2 fields, SQLiteConnection dbConnection)

   at QSORelay.Entities.SqliteLogbook.LogContact(Dictionary`2 fields)

 

Will look in group messages , maybe someone have solution…

 

GL 73

 

Arnolds

YL2CA

Re: HRD needs refresh after logging .

Chris VK2BYI
 

Hi Jacques,

Thank you for the feedback.

You shouldn't have to refresh HRD for the new row to appear.  As long as the grid in HRD is sorted in Time On descending order - that is, with the most recent contacts at the top - the row should appear automatically.  That is what happens on my setup and others that I know.  This might be a question better asked of the HRD Support Group forum.  For a workaround, there is an option on the Settings menu in HRD Logbook called Sharing that allows you set a periodic refresh every 5 seconds - but I repeat this shouldn't be necessary, it should happen after HRD accepts the new contact.


With regards to your second question, it is "normal".  The only columns that are populated are those where values have been provided by JTAlertX, if a value is not provided, it is left 'null' or empty.  So at first it looks like LoTW Sent, eQSL Sent, QSL Sent etc. appear empty, but when you open the contact in HRD and press F7, HRD writes the row back with 'N' values in those sort of columns.

Thanks from the UK

Mike Davies <face@...>
 

Bruce,

Downloaded and installed as per the instructions.  Windows 10 prompts for an exception for the UDP for but otherwise the instructions were absolutely precise.  Everything is working as it should.  An excellent utility.  A small donation is on it's way.

Many Thanks

--
Mike, G0KAD

Re: HRD needs refresh after logging .

Mike Davies <face@...>
 

Not sure if this is the solution as I already had this set but have a look in HRD Log under Tools, Configure, Sharing and make sure the Poll for Updates box is ticked. 5 seconds should be sufficient. Mike, G0KAD

Re: Contact was not logged in QSORelay SQLite database

Bruce VK2RT
 

Mikko, please go to Options in QSO Relay where you have selected "Digimode Logbook - Access" check the Connection String and make sure you have it pointed to the correct file. I thought that maybe you have other files there and you are pointing to the wrong file. Thanks DE Bruce VK2RT

Re: HRD needs refresh after logging .

Chris VK2BYI
 

Thanks Mike, yes that is a workaround. But as I said above it should happen automatically. I don't have it set, but every contact being logged displays immediately for me and my colleagues. :)