Hello, Firstly thank you for the program, I was previously logging through ADIF etc.from both JT alert and 647 HRD. I installed it yesterday and it all works perfectly no hiccups etc. simple abd

Hi Bruce Before sync database is empty like it should, after sync i have all QSO from HRD logbook. In both situations i can use delete command, when i have contacs from HRD it also deletes them. After

I have exactly same problem on Windows 10.R8KAH, Oleg

Hi Mikko, from your images everything seems to be setup correctly.You said before that you successfully ran "Synchronise Databases", can you select "Delete a Contact" and show me what is shown in that

Hi Clovis, I am glad to hear that you have resolved the issue. However, we have a fix in place to handle the comma as well as a full stop in the next release. So you will be able to revert to the

Hi, I tested with default foldes, but still same error OH8EJW, Mikko

Thanks Chris. I think you nailed it in both the software and the problem. For now I'll just close the error window. 73 Hank W6IR

Yes Bruce! This is an issue with Windows Regional Settings. I have changed the comma "," for a point "." and all is ok now. Many thanks! 73, Clovis- PY3OG

Hi Bruce I tried first default locations and sympthon was same. Documents folder was the last test to change location to avoid permmission problems, but it not helped. I can retry with default

Chris: Checked the sort thing you mentioned. They still are not showing up. Here are the files you requested. I am a Firefighter/Paramedic. Will be leaving for my 24hr shift in a few minutes. If

Hi Luca, If you are receiving the following popup, then I believe that is being caused by QSO Relay checking HRD Logbook too soon after sending a contact to be logged, and HRD Logbook hasn't had

I have also a popup... this evening I try to disable Automatically send a second logging request if the first fails" ? I use win7 and mariadb.... Tnx for great work 73 de IW1FZR Luke

Hi Hank, QSO Relay may be checking too soon after forwarding a QSO to HRD Logbook. So we will have to put a short delay and a retry when trying to verify if the HRD Logbook actually logged the

Hi Mikko, When you created the QSORelay.SQLite database file, it would have been located in the AppData/Roaming/VK2BYI/QSORelay folder, did you copy that file to the folder

Hi Bob, They may be there. You can re-sort the rows in the grid by clicking on the column headings - so if you click on QsoDate it will re-sort by date in one direction, and clicking again it will

Greetings from Finland First thank you so much that finally we have solution use HRD6 with jtalertx, many of the JTDX users with jtalertx have get this work but some how i just can get this work.

Thanks for the feedback Clovis This may be an issue with Windows Regional Settings where a comma "," is being used as the Mhz separator as shown in the WSJT-X frequency window. In our case the

Hi Morris, Each time the sync process is run, QSO Relay has to compare all rows in both databases to determine the necessary changes to be made in the QSO Relay DB, so it still may take a significant

Check Settings in JTAlertX Logging -> Log4OM Do you have the option ticked "Automatically send a second logging request if the first fails" ? Bruce VK2RT

I'm getting a popup box every log attempt that says the QSO wasn't logged to HRD yet the QSO does show up in HRD. Anyone with ideas? Hank W6IR