Just curious if there was any further update on the new release. Regards Roland

Howdie, New here,I am going to build a cnc 3 axis table, I have several pieces of ball screw,and will be looking for some drill rod to make the stabilizers. I built the hobby cnc board with 4 axis and

Hi all, Is there a line or lines of code that I need to add when cutting vinyl so that the corners cut how they are ment to. I have found that as the knife turns the corner it "lags behind" so any rou

I know, the most often question. I replaced an old PC computer running Windows 98 with a 3 year old Dell computer running XP. Steppers, Gecko 201's, an old copy of Turbocnc, and it does everything jus

I set my machine up about six years ago and never touched any setting since, as it has been doing what I wanted it to do. I am running ver 4.01 02/08/05 on a win98 machine. I have just changed the Y a

would like to send signal to Turbo CNC from relay off of a plc so that the macine will proform function What would i connect to ?? How would my program read ??

Hi all, I have been given an old Toshiba laptop that I want to setup for Turbocnc. It originally had win98 installed and was later updated to winxp pro which I think was a limited success due to the c

Does anyone have an TurboCNC EXE with the Vfd.pas (VFD unit for TurboCNC) from awemawson implemented? Will this work as a true pulse out to a pin where the pulse width can be changed with the S word i

Hello, I bought this drive here; http://www.goodluckbuy.com/12-36v-3a-tb6560-3-axis-cnc-motor-driver-stepper-new.html Does anyone have it running in TurboCNC? Albuquerque

Hello... I have searched up and down for the largest "planing" bit I can find that has an 1/8" shaft / shank. I have a 24" X 15" table I would like to level out periodically, but my 1/8" router bit ta

I would like to do some calculations based on the current XY coordinates. Is there any way to capture the X, Y values into variables? Kind of like the G92 command inverted.

Hi, The online manual talks about arc factor being 1 and setting it to below this for slower operation and talks about step loss is a reason for reducing the figure, as I read it. I want to traverse m

Hi, Folks: I'm thinking of playing with the Arduino, GRBL g-code interpreter, and MacBook Pro notebook computer. I know that some of the folks on this list are already playing with this combinationi s

hi, reading online doc's, section "Set Up of Step and Direction Lines". http://www.dakeng.com/man/turbocnc.html#_Toc90515682 verbatim: For drives that step on the low to high transition or at the high

Hi Dave While you're around.............. Are you considering the option, which I have often bandied on the lists, of unconditionally echoing the g-code out the serial port as it is handled (tick opti

hi, i have built a shopbot clone. it's kind of working but i have a problem with loss of position and arc's slow to a crawl. http://i.imgur.com/t9MjK.jpg My x/y step is like a huge 16 digit below the

Hi, On my new router I made a tool height feedback with an opto coupler and dc/dc converter as I found manually setting is very variable on my small cnc. Does Turbocnc support this? I looked under the

hi, is their any way to adjust the default feedrate. It's to slow for my new router which is in metric mode. It seems to be limited to about 2000mm/minute. If I use G01 I can really get some speed up.

Hi Was wondering if the latest TurboCNC will come out before christmas(dejavu) Anyone got any news on this? Regards Roland

Hi, I made a test video, showing how to cut the end of a cannon barrel. http://www.youtube.com/watch?v=6NvixWx6IXE Cheers Bob A www.cad2gcode.com/lathe www.cad2gcode.com/cncprojects