Hi, I've read on twitter that people are using the Frequency Locking function on their QO-100 sdrangel recivers. I'm currently using a PLUTO SDR with sdrangel on transmit with very good results. I'm u

I currently use SDRangel to determine the offset for MMDVM with a LimeSDR mini as the receiver. is there a guide available to setup the LimeSDR mini as an D-Star transmitter? We are currently evaluati

Hi, I've just upgraded to Buster and just installed the sdrangel_4.9.0-1_amd64_buster.deb package. Unfortunately when I run the package from the console I get the following error - 2019-06-07 13:17:04

Good morning, I am doing a full rework of cmake scripts on SDRangel to support multi-platform and auto packaging with dependencies discovery. The work can be seen at [1]. The objective will be to dist

I'm using SDRAngel to receive the Es'Hail 2 downlink on 10489MHz through an LNB with a 9750MHz LO. It would be nice to be able to enter 9750MHz as the transverter offset and have SDRAngel display the

Hi, I am considering using a Raspberry Pi 3B+ with a LimeSDRMini for a portable stations for QO-100 and don't want to have to lug a larger PC along. Got it working with a screen attached and running t

Hi, Just hint that may help. I struggled for a long time with not being able to get proper power out on SSB. The audio input level seemed to be too low to provide enough 'drive' to the SSB modulator.

Hi, Decided to start this as a separate thread. The attached image shows my power output on the Lime mini using both the Hi and Lo antenna options. It seems that the Lo setting is better than the Hi,

Hi everyone, Is anyone else seeing "Frequency Tracker" appear twice? I am using 4.8.0 on Ubuntu 18. I have used both the prebuilt package as well as compiling myself and get the same result both times

Hello When working with ssb modulator and especially with the compressor, the signal spectrum expands. This is not only visible in the panorama, but also transmitted. If I reduce the microphone gain o

Hello. Thought you folks might get a kick out of this. Not very useful at this time, as haiku does not have 3D acceleration, yet ... there is hope. Might have a look at the libhackrf FreeBSD implement

Hello, after some troubles I never got the limesdr seen on a virtual linux box, I decided to run the docker version on a brand new ubuntu bare metal installation. after some new troubles, I think I ha

I create a configuration .py file. It adds (or changes) R0 - HackRF, sets the necessary settings, adds Sink T0 - HackRF, reads the settings, but when you try to change them, the application crashes. H

When trying to modify one of the .py examples, I ran into the fact that r.status_code = 202 returned. Perhaps this happens when calling commands that require some time to execute. For example, here I

I am trying to use commands, but any selected file (.py from the examples, empty .bat or .py with one empty main function) returns Error: Failed to Start in the command output window. I tried to run s

I haven't run the DATV software for a couple of months, and now when pressing Play a spectrum and waterfall are briefly displayed (~0.5 seconds), and then the program exits. The same software & hardwa

Edouard / All - Using the Windows version of SDRAngel I'm having a strange issue where the only audio preference setting that I can use is for the system default and no other setting. I've also seen t

Hi, Im facing s little problem regarding the maximum TX level from my Pluto under SDRangel. I can reach a maximum of app. -5dBm at 2.4 GHz but also at 400MHz. Tried this with max. Volume setting, The

Hi everyone, using my very limited knowledge I'm trying to compile SDRangel on my MBP, using QT 5.12.1 on Mojave. I've succesfully sorted some problems but now I'm stuck on this compiling error: ld: l

I think the issue is more general. The file record feature does not offer the option to choose where to save the file. Maybe a file dialog should be open with a default file name as it is today. It wi