|
Compile under macOS 16 messages
#install
Hi all, On macOS: At first I tried to compile v6.6 and got an error. Missing speech-libraries. Then: port list | grep speech and port install qt5-qtspeech Yes!!
Hi all, On macOS: At first I tried to compile v6.6 and got an error. Missing speech-libraries. Then: port list | grep speech and port install qt5-qtspeech Yes!!
|
By Loe Walter
·
|
|
ADDING DCS DECODE in the NBFM demodulator window 4 messages
Hi there Is it possible to add dcs (digital code squelsh) decode in the NBFM Window in addition to the CTCSS decode that already exist there ? Thanks Forward Ronen - 4Z4ZQ http://www.ronen.org
Hi there Is it possible to add dcs (digital code squelsh) decode in the NBFM Window in addition to the CTCSS decode that already exist there ? Thanks Forward Ronen - 4Z4ZQ http://www.ronen.org
|
By Ronen Pinchook
·
|
|
Pluto via LAN disappears on WiFi 3 messages
#plutosdr
#ubuntu
Hi! I couldn't get sdrangel to work with my ADALM-Pluto at all, while the LimeSDR Mini was working fine with my selft compiled setup under Ubuntu 20.10. Then I discovered, that the description was upd
Hi! I couldn't get sdrangel to work with my ADALM-Pluto at all, while the LimeSDR Mini was working fine with my selft compiled setup under Ubuntu 20.10. Then I discovered, that the description was upd
|
By DC3AX
·
|
|
LoRa demodulation using ChripChat 2 messages
#plutosdr
Hi, It is my first post on this forum. Congrats to all people contributing to SDRAngel, this tool is just amazing. I've been testing SDRAngel with a Pluto SDR and a SX1276 transciever. The documentati
Hi, It is my first post on this forum. Congrats to all people contributing to SDRAngel, this tool is just amazing. I've been testing SDRAngel with a Pluto SDR and a SX1276 transciever. The documentati
|
By fabien.ferrero@...
·
|
|
Bad Decode of DMR 6 messages
#sdrplay
Hi there The DMR decode is very bas it is impossible to understand the conversation is it happening to others as well ? if not what are the parameters needed for good decode? Thanks Forward Ronen - 4Z
Hi there The DMR decode is very bas it is impossible to understand the conversation is it happening to others as well ? if not what are the parameters needed for good decode? Thanks Forward Ronen - 4Z
|
By Ronen Pinchook
·
|
|
Frequency correction error limits too small 5 messages
Hit there One of My SDR have a -160PPM The software allow only up to +-100 Can you please set more PPM range ? (say +-200) Or any other solution ? Thanks Forward Ronen - 4Z4ZQ http://www.ronen.org
Hit there One of My SDR have a -160PPM The software allow only up to +-100 Can you please set more PPM range ? (say +-200) Or any other solution ? Thanks Forward Ronen - 4Z4ZQ http://www.ronen.org
|
By Ronen Pinchook
·
|
|
Docker-Compose Question 8 messages
Hello All: I’m trying to bring up a Docker Compose Ecosystem, and having some trouble. My setup is a RPi4 running Ubuntu Server 20.10 (headless), and a desktop running Ubuntu 20.10. My goal is to inte
Hello All: I’m trying to bring up a Docker Compose Ecosystem, and having some trouble. My setup is a RPi4 running Ubuntu Server 20.10 (headless), and a desktop running Ubuntu 20.10. My goal is to inte
|
By Andrew
·
|
|
Puzzled with Adalm Pluto Frequnecy offset. 6 messages
Hi all! I compiled the sources for use with Ubuntu myself what works fine with Lime Mini and RTL-Stick. I can also control my Adalm-Plutoo but I cannot get it to set a frequnecy bewlow 325.000kHz. I c
Hi all! I compiled the sources for use with Ubuntu myself what works fine with Lime Mini and RTL-Stick. I can also control my Adalm-Plutoo but I cannot get it to set a frequnecy bewlow 325.000kHz. I c
|
By DC3AX
·
|
|
How to set receiver offset? 2 messages
#hackrf
I'd like to use a Ham It Up from Nooelec, but, I can't find anywhere to set the offset for the receiver; is this feature not supported?
I'd like to use a Ham It Up from Nooelec, but, I can't find anywhere to set the offset for the receiver; is this feature not supported?
|
By Timothy Reaves
·
|
|
Latest libbladerf/bladerf from git and gain contril 8 messages
I’m asking here because I saw this post in the Nuand forums from awhile back posted by the SDRAngel developer https://github.com/Nuand/bladeRF/issues/755 I have just recently installed the lasted blad
I’m asking here because I saw this post in the Nuand forums from awhile back posted by the SDRAngel developer https://github.com/Nuand/bladeRF/issues/755 I have just recently installed the lasted blad
|
By Aaron awdmesh
·
|
|
General app / SDR / radio questions 8 messages
Is there a source someone could point me to to help me learn & understand what the various settings are for, and what the actual impact on the output is? I'm playing with my HackRF One, and currently
Is there a source someone could point me to to help me learn & understand what the various settings are for, and what the actual impact on the output is? I'm playing with my HackRF One, and currently
|
By Timothy Reaves
·
|
|
Range of the spectrum display 2 messages
I can't seem to find any means to widen the range of frequencies displayed. It seems fixed at 100 kHz. Is this range adjustable?
I can't seem to find any means to widen the range of frequencies displayed. It seems fixed at 100 kHz. Is this range adjustable?
|
By Timothy Reaves
·
|
|
Pluto sounds like a stuttering Mickey Mouse 2 messages
#osx
#plutosdr
Hello, I have no idea, wich sound configuration could be wrong on both Windows and Mac. Any other idea? Update: sdrangel V 6.0.0 on Windows 10 works perfect. jobe
Hello, I have no idea, wich sound configuration could be wrong on both Windows and Mac. Any other idea? Update: sdrangel V 6.0.0 on Windows 10 works perfect. jobe
|
By sdrangek@...
·
|
|
PI4 build instructions - PTT button 20 messages
Hi, I would like to have the latest SDRAngel version to run on a PI4 with PTT. Got the precooked image from luigi.ltd with SDRAngel (4.14.19) but apparently does not have the PTT plugin. Is it because
Hi, I would like to have the latest SDRAngel version to run on a PI4 with PTT. Got the precooked image from luigi.ltd with SDRAngel (4.14.19) but apparently does not have the PTT plugin. Is it because
|
By Giuseppe Marullo
·
|
|
SDRangelcli can't connect to SDRangel instance outside the OS 2 messages
Simply if you open both SDRangelcli and SDRangel on the same OS, it works without problems, however, if the SDRangelcli is in a separate machine (let's say in the host machine where SDRangel the sever
Simply if you open both SDRangelcli and SDRangel on the same OS, it works without problems, however, if the SDRangelcli is in a separate machine (let's say in the host machine where SDRangel the sever
|
By haahaham@...
·
|
|
HF+ Discovery sampling rates in SDRAngel 3 messages
#github
I've noticed that the Airspy plugin allows sampling rates of 192,256,384,456,768,912 SDR# allows these in addition to 228, 128, 114, 48, 32,28,24,16,14 Would it be possible to add 228, 128 and 114? Th
I've noticed that the Airspy plugin allows sampling rates of 192,256,384,456,768,912 SDR# allows these in addition to 228, 128, 114, 48, 32,28,24,16,14 Would it be possible to add 228, 128 and 114? Th
|
By Doggy
·
|
|
A BIG thank you!
I would just like to thank the developer for all his work in developing this great product. Also a big thanks to other people who have contributed plugins, testing et al. I really like it and look for
I would just like to thank the developer for all his work in developing this great product. Also a big thanks to other people who have contributed plugins, testing et al. I really like it and look for
|
By Doggy
·
|
|
Export ALL Presets at ones? 3 messages
#windows
Hello all, I want to move all my presets from my windows-7 to my windows-10 computer. So far I found out that the export is only exporting 1 preset at a time. Is there a way to do that in one go? Can
Hello all, I want to move all my presets from my windows-7 to my windows-10 computer. So far I found out that the export is only exporting 1 preset at a time. Is there a way to do that in one go? Can
|
By
pa1ns@...
·
|
|
SDRAngel HACKRF ONE DSTAR ??? Possible 3 messages
Hello all, I have SDRangel transmitting FM and would like to transmit DSTAR. Is this possible? Don't see anything in my reading. 73
Hello all, I have SDRangel transmitting FM and would like to transmit DSTAR. Is this possible? Don't see anything in my reading. 73
|
By
mikefunaro1@...
·
|
|
Closing Demodulators 2 messages
I’m just beginning to work with SDRAngel and in stumbling around have created several Demodulators. I have spent a fair amount of time trying to figure out how to remove most of them, with no luck. Ca
I’m just beginning to work with SDRAngel and in stumbling around have created several Demodulators. I have spent a fair amount of time trying to figure out how to remove most of them, with no luck. Ca
|
By Carlos Cardon
·
|