Hi Guys I have been using a HackRF for a few years with gqrx and gnuradio under macOS. I’m a ham radio op, and I do a lot of VHF UHF microwave band operating, and was attracted to the Hack due to its

I have it running with the HackRF now on CW with a clean signal. It took some playing with settings to alter the bandwidth etc to achieve this. I have tested it up to 2304.1 Mhz with good results. I h

Clean SSB means a clear undistorted transmitted SSB signal. I noted that with CW you had to adjust the bandwidths etc to achieve a T9 signal on CW … ie a clean cw signal. Have not found settings that

I have SDRAngel running on Ubuntu 14.01 with a hackRF. My question is how do you save the settings... ie I have a source and a sink set up but I keep losing the sink every time is shut down despite sa

I have the same problem with the config not saving… or it just saves the RX config not the TX config… Both in Windows and Linux Its pretty tedious re setting everything… So exactly where do the config

Ziga Congrats! I would like to run it on macos as well with HackRF. I have it partially working here - unstable under Mojave. HNY TU Dana VE3DS Toronto

#osx #github

Ziga DMG looks very nice ! I have hackRF driver installed (hackrf info shows it) but program does not find HackRF driver when I select source or sink. What am i missing ? Thanks Dana

#osx #github

Image not found….? Dana

#osx #github

sorry if dupe… Dana

#osx #github

Looks like same issue? HackRF is found using ports > I’ve been using it for years with GQRX etc. Is it a Mojave issue Ziga or the dmg? Dana ve3ds Toronto

#osx #github

still no sources found…debug attached… looks like different issues now.. corrupted file?? maybe best to go back to square one….? Dana

#osx #github

Now crash on startup… Dana

#osx #github

I reinstalled from the DMG again over the original and now it sees the HackRF source. So I guess libiio needs installation. then reinstall the DMG. So Z next version should have libiio install. Let yo

#osx #github

Transmit working 1296 - 3456 MHz Dana Begin forwarded message: From: Dana Shtun <dshtun@...> Subject: Sir Date: December 28, 2018 at 19:17:29 EST To: Dana Shtun <dshtun@...> Click to Downl

Ok receive working - but spectrum display is not clean with multiple spurs above and below the main signal. Transmit is fine on CW working well, HackRF LO drifts but that can be corrected. Any way to

#osx #github

Transmit screen shot 3456 Mhz Dana

#osx #github

RX side Dana

#osx #github

Example of multiple signals Dana

#osx #github

I have the spectrum display set up much cleaner now, took some playing with controls. Very Stable with the HackRF now on MacOS Mojave!! Transmit and Receive with Hack RF from 50 Mhz to 5760 Mhz now. T

#osx #github

Transmit on CW OK! Dana

#osx #github