|
Re: 2kw Portable!
Thanks for TL7M, Graham.... will take a look. Well done you!
Re New Topic....
look at the bottom of this (..any) message for the blue menu list.
Click "New Topic".
Tah Dah!
Den
Thanks for TL7M, Graham.... will take a look. Well done you!
Re New Topic....
look at the bottom of this (..any) message for the blue menu list.
Click "New Topic".
Tah Dah!
Den
|
By
Den (M0ACM)
·
#121
·
|
|
Re: 2kw Portable!
As I am unable to work out how to create a new topic, I thought you would like to know that TL7M. (Central Africa)is currently on 21.083 MHz FT8 F/H. The signal is up and down here but I managed
As I am unable to work out how to create a new topic, I thought you would like to know that TL7M. (Central Africa)is currently on 21.083 MHz FT8 F/H. The signal is up and down here but I managed
|
By
Graham (G4OED)
·
#120
·
|
|
Re: 2kw Portable!
Should keep him warm in a North American winter. Not recommended.
Cliff G3MNJ
Should keep him warm in a North American winter. Not recommended.
Cliff G3MNJ
|
By
Cliff (G3MNJ)
·
#119
·
|
|
Re: 2kw Portable!
Absolutely Fab find Dom !
Exactly what amateur radio is all about.... trying new ideas and recombining and re-synthesising older ones!
Apart from the small matter of the EMF consideration (!), I would
Absolutely Fab find Dom !
Exactly what amateur radio is all about.... trying new ideas and recombining and re-synthesising older ones!
Apart from the small matter of the EMF consideration (!), I would
|
By
Den (M0ACM)
·
#118
·
|
|
2kw Portable!
I'd like to see the EMF requirements for this setup! Only in America!
He clearly thought his Yaesu FT-817 was a little under powered.
https://www.youtube.com/watch?v=Nxp_Nsa54_Q
73,
Dom, 2E0WHQ
I'd like to see the EMF requirements for this setup! Only in America!
He clearly thought his Yaesu FT-817 was a little under powered.
https://www.youtube.com/watch?v=Nxp_Nsa54_Q
73,
Dom, 2E0WHQ
|
By
Dom - 2E0WHQ
·
#117
·
|
|
Re: CQWW SSB 2021 edition
Hi.
Despite the events of the past month with my health I managed to get some time on the radio. Whilst I do not have a good station for “running” or having good QSO rates in the contest I was
Hi.
Despite the events of the past month with my health I managed to get some time on the radio. Whilst I do not have a good station for “running” or having good QSO rates in the contest I was
|
By
Andy (G0UWS)
·
#116
·
|
|
Re: CQWW SSB 2021 edition
Slight typo above, the correct web link is https://www.3830scores.com/
73,
Dom, 2E0WHQ
Slight typo above, the correct web link is https://www.3830scores.com/
73,
Dom, 2E0WHQ
|
By
Dom - 2E0WHQ
·
#115
·
|
|
Re: CQWW SSB 2021 edition
Hi Den,
Greetings from a wet South West France. Well done on your weekend activity. Don’t forget to post your scores on scores3838.com to boost the UK showing. I should have mentioned my activity
Hi Den,
Greetings from a wet South West France. Well done on your weekend activity. Don’t forget to post your scores on scores3838.com to boost the UK showing. I should have mentioned my activity
|
By
Ian McCarthy G3YBY F5VKT
·
#114
·
|
|
Re: CQWW SSB 2021 edition
Hi Den,
Noted. I do some research and see what I can organise/schedule.
Regards
viv
M0IEP
Hi Den,
Noted. I do some research and see what I can organise/schedule.
Regards
viv
M0IEP
|
By
Viv (M0IEP)
·
#113
·
|
|
Re: CQWW SSB 2021 edition
A great showing everyone.
I worked as a Single Operator Low Power, Classic Overlay, which meant I could operate for a maximum of 24 hours out of the 48. I did slightly under 18 hours, which was quite
A great showing everyone.
I worked as a Single Operator Low Power, Classic Overlay, which meant I could operate for a maximum of 24 hours out of the 48. I did slightly under 18 hours, which was quite
|
By
Graham (G4OED)
·
#112
·
|
|
Re: CQWW SSB 2021 edition - G4L.
Didn’t do a major attempt because I hadn’t managed to get a decent low band antenna or a beam up. Went for 40m single band, HP, unassisted.
Had to use the Cushcraft R7, a 40m to 10m vertical but
Didn’t do a major attempt because I hadn’t managed to get a decent low band antenna or a beam up. Went for 40m single band, HP, unassisted.
Had to use the Cushcraft R7, a 40m to 10m vertical but
|
By
Tony (G4LDL)
·
#111
·
|
|
Re: CQWW SSB 2021 edition
Yes filtering is key on these "all working stations on together rat race".
That sounds like an interesting talk topic,
(@ Viv.) though facilities on different rigs vary massively and accessing the
Yes filtering is key on these "all working stations on together rat race".
That sounds like an interesting talk topic,
(@ Viv.) though facilities on different rigs vary massively and accessing the
|
By
Den (M0ACM)
·
#110
·
|
|
Re: CQWW SSB 2021 edition
Some fantastic results there, congratulations to everyone.
I too dipped in and out, not sure how many hours, certainly less than 10, my results were:
QSO’s: 53
DXCC: 32
Zones: 10
Some fantastic results there, congratulations to everyone.
I too dipped in and out, not sure how many hours, certainly less than 10, my results were:
QSO’s: 53
DXCC: 32
Zones: 10
|
By
David (G7IXU) <david.welch.g7ixu@...>
·
#109
·
|
|
Re: CQWW SSB 2021 edition
Yes, I agree, don't think my results would be vastly different with 50W to be honest. The directionality of the hex beam made all the difference. The SPID rotator worked as hard as I did, constantly
Yes, I agree, don't think my results would be vastly different with 50W to be honest. The directionality of the hex beam made all the difference. The SPID rotator worked as hard as I did, constantly
|
By
Marc (M0KYB)
·
#108
·
|
|
Re: CQWW SSB 2021 edition
Great showing from the club!
Really interesting looking at the QSO Maps. It looks like both Marc and I were pretty much working the same areas, despite the difference in power and antennas, which
Great showing from the club!
Really interesting looking at the QSO Maps. It looks like both Marc and I were pretty much working the same areas, despite the difference in power and antennas, which
|
By
Dom - 2E0WHQ
·
#107
·
|
|
Re: CQWW SSB 2021 edition
Hi all,
Well, I can confirm that the hex beam works!
I operated for 44 hours, catching 3 hours of sleep on Saturday night and finishing at 11pm on Sunday night. By that time it felt like I had "milked
Hi all,
Well, I can confirm that the hex beam works!
I operated for 44 hours, catching 3 hours of sleep on Saturday night and finishing at 11pm on Sunday night. By that time it felt like I had "milked
|
By
Marc (M0KYB)
·
#106
·
|
|
Re: CQWW SSB 2021 edition
Great to see, hear and work some of the other club members during the CQWW Contest.
I chose to work across the weekend, with my plan to work DX rather than numbers. Whilst I like working these exotic
Great to see, hear and work some of the other club members during the CQWW Contest.
I chose to work across the weekend, with my plan to work DX rather than numbers. Whilst I like working these exotic
|
By
Dom - 2E0WHQ
·
#105
·
|
|
Re: CQWW SSB 2021 edition
A good effort there, Ian.
To be honest, you didn't miss much later on....
From tea time today (Sunday) 20m collapsed from the East very rapidly!
I managed to work only 16 Qs from 19h00 to 21h00 -
A good effort there, Ian.
To be honest, you didn't miss much later on....
From tea time today (Sunday) 20m collapsed from the East very rapidly!
I managed to work only 16 Qs from 19h00 to 21h00 -
|
By
Den (M0ACM)
·
#104
·
|
|
CQWW SSB 2021 edition
Hi all,
Just a quick report on my CQWW effort this weekend before leaving for the ferry this evening. It was always going to be a casual part time effort as rugby in Bath got in the way yesterday
Hi all,
Just a quick report on my CQWW effort this weekend before leaving for the ferry this evening. It was always going to be a casual part time effort as rugby in Bath got in the way yesterday
|
By
Ian McCarthy G3YBY F5VKT
·
#103
·
|
|
Re: Swindon New LED Lighting
#QRN
#QRM
I'm hoping that when they change ours from the old sodium the QRN will reduce!
LDL.
I'm hoping that when they change ours from the old sodium the QRN will reduce!
LDL.
|
By
Tony (G4LDL)
·
#102
·
|