Yes Chris:

I had that problem with the 12 mtk but I thought that the 22 mtk might do that.  I don’t think that the USB driver permits loopback but I may be wrong, as I often am.

Cheers.

Yeah, I'm not sure how you would set it up to use the effects over zoom or the like. Except just using it as an analogue desk connected to another interface of course.

Possibly with some sort of wrangling with virtual audio cable. Actually I have a similar question to ask about this.

CHris

Chris:

 

Thanks much.

 

So other than through a DAW, I gather that one cannot send the effects to a program such as Zoom, TeamTalk ETC?

 

Thanks all over the place.

 

 

 

From: rwp@groups.io <rwp@groups.io> On Behalf Of Chris Turner via groups.io
Sent: Sunday, April 25, 2021 9:23 AM
To: rwp@groups.io
Subject: Re: [rwp] question for 22mtk users.

 

Well depends.

Another one with the 12 mtk. The way you can use the fx, eq, pan etc on the board to print to a recording is by receiving your audio from the PC to the individual usb returns. Set everything how you want and mix it down back to the pC on tracks 13/14. 23/24 in your case.

 

So in reaper for example you'd set the output for each track to a usb out on the board.

Set the usb return button on those tracks on the board.

Add any fx you want in reaper on those tracks too if you like.

Make your adjustments, arm a track with inputs 23/24 and record.

 

Otherwise, when just laying down tracks, the audio interface is post gain but pre fader eq and fx.

 

You can of course just use it as an analogue board bipassing the audio interface with the master outs connected to a separate interface.

 

Regards

 

Crhis Turner

 

 

 

On 24/04/21 23:48, Jim Noseworthy wrote:

Are the effects sent out the USB with the main mix?

 

Thanks.

 

 

-- 

Soundtrack, electronic, synthwave. LostDroid, in all the usual places and;

lostdroid.bandcamp.com

-- 

Soundtrack, electronic, synthwave. LostDroid, in all the usual places and;

lostdroid.bandcamp.com