Hey all looking for a Rockwell 11” steady rest (I know it’s hard to come by figure I would try), the round collet holder, and a tail stock assembly. any help is appreciated!! thanks all

Hi Everyone. I've lurked on this forum for awhile, but this is my first post. I've had the Delta/Rockwell 10 x 36 since about 1990, purchased at auction at a local secondary school, when they stopped/

Hi all! I just picked up a 10x36 lathe and it needs a little help. It's missing the tailstock most importantly. Anyone got one? Or know where to find one? I've been told an Atlas 10" tailstock can wor

Hi folks, looking to see if anybody has the two drive belts for the 14” lathe model? I think they are in need of replacement. thank you for your time

Good afternoon. I am looking for parts for our Rockwell 25-100, S/N 137XXXX, specifically an MCL 552 S retainer pad. This part cross references to various machines. Is there an outfit that carries suc

Hello, the tailstock base on my 25-210 is worn. I have tried adding shims to adjust center line, side to side wear prevents any repeatability. I am going to machine the tailstock base. Does anyone hav

Couldn’t find any for sale couldn’t find any files for sale.. I made the part in fusion 360 and have working PetG prototypes. I’m going to be offering these free of charge just pay shipping. Want to h

Long time watching these posts, replied to plenty, but first time posting one, so be kind if I messed up protocol. In the long process of rebuilding a Rockwell 10" (25-700) lathe. I've been able to fi

Hi group. I am offering my recently restored 1952 Rockwell Delta 25-100 for sale. I have a short video on youtube documenting some of the process and end result of my efforts. Really nice lathe with l

After about 20 years of owning this great piece of equipment, the time has come for us to part company. Ive attached the link below The lathe is located in northern California Please let me know if th

Is anyone parting out a rockwell 25-700 10 inch lathe ? I need #18 (414-02-051-5004 )back gear and the shaft #96 ( 414-02-106-50030) Please call me if you have these parts for sale ,815-441=2132

I have a Rockwell 11" metal lathe that is in good condition. It's 220 and all the tooling is included. Kennedy took box top plus owners, part's manual. Was my Dad's who passed away & loved running it.

Hello group! I have an 11" Rockwell Lathe in good working order. I wanted to put this out there to see if anyone is interested in purchasing it. we have not used it in several years since we have a 14

Hello all, I’m a new member and recently new owner of a 1957 Rockwell 11”. It’s quite an upgrade from my old noname 3 in 1, obviously! I’ve attached a short video of my spindle running with a rhythmic

I put this out as secondary query in a post a week ago but now really need to figure out what the part is and if there are any tricks to installing or adjusting it. The physical part would be easy eno

I've been working on refurbishing and repenting a 25 - 100. While tearing apart and stripping the quick change gearbox I noted that only 4 out of the 10 oil ports actually have passages down through t

Hi, the movers tipped over my lathe and I've got most of the broken components repaired or replaced, but I still need MCL-559 (the shaft for the gear change handle) and mcl-204 (one of the index pins

Was doing some maintenance on the old Rockwell 11” metal lathe, decided to add some grease to the spindle bearings. Well, I think I got carried away because now the spindle has a lot of drag and heats

Anyone have any idea if a carriage stop from a different manufacturer will work on a Rockwell lathe or do I need to make my own?

I been looking for one for 2 years, no luck except on EBay where they are too much. Any leads would be great.