Gentlemen, I’m in need of some advice for the purchase of an Anritsu Site Master. Initially I was looking at the S113B model, but when I started to investigate it I found out that it is over 20 years

I should have paid more attention to this thread earlier. So I ask those of you who have experience with the Progrock - could I use it on a Motrac base station?

I have a VHF MTR2000 that will eventually be set up on Allstar but for now I just want a basic setup with the internal controller. The programming seems straightforward but the repeater does not seem

Hi to All, Our local repeater group as a repeater site that is too far for linking with a RF link. Since we have a good internet connection at both site we a are using All-Star for linking. The All-St

Hate to take up the bandwidth...but...Larry's message really hit home. I drooled over the Fair Radio catalog. My first TX was from a EI magazine article, one tube CW 40m 15 watt rig. RX was a Knight S

I am wanting to purchase a 70cm Mastr lll, Whole or part, working or non-working. Contact me off list: terence_cost @yahoo. Thanks , k8qg

I have a R2001D that has a processor board problem. I do have the service manuals and do have experience troubleshooting digital circuits. The symptoms are: alarm tone from speaker immediately after t

$5 each plus postage -- Oz (in DFW) N1OZ

I have since learned from the fellow that dropped this piece of equipment off that he got it from his buddy who had a 40+ year career with the telephone company. Possibly some years at a 5E switch. He

Hi all, I came across a posting that Mark did on the amateur repeairs group about how crystals were made in WW2. Present day crystals are simulair. The "movie" is long and may be boring but informativ

Hello All, I am rebuilding our hybrid combiner because the last time we used it we were unable to communicate. Everytime we keyed the radio, we had about 10seconds of audio before it cut out. I have b

Looking for a repeater controller with a repeater port and one link port. Voice type not required. What do you have? -- Thanks and 73, Jim W7RY

Part number Motorola 30-82565B34. My remaining spares are very old and frayed. Shipping anyway is fine. - Regards, Karl Shoemaker To contact me, please visit SRG's web site at http://www.srgclub.org f

What does it say about software quality when a daily initialization is needed to make it through the next day? ----- I was IT manager for a corporation with over 1,200 employees. I used to use a HP 30

I am looking for a 902-927 MHz Panel Antenna for our 900 MHz 100 watt repeater, if anyone has one for sale? Please let me know...thank you.

Location: Tacoma WA area (Local pickup only) 125W Range 2 VHF Conventional / P25 with wireline board CPN1048 AC Power Supply $500 FIRM Contact Dean @ 253 282-3179 For my own use I've made some simple

Here are two pictures of the innards of the mystery unit. There sure is some impressive plumbing in there. The picture with the circuitry is top side. 73, Gary - W6GVS

This instrument was dropped off at our table at a hamfest recently. No one in my acquaintance seems to know what it is. As you can see it is an Avantek AMS-4201. The case dimensions are 9 X 9 X 3.5 in

One of my repeater site needs some LMR-400 ripped out that was supposed to be installed as an emergency fix over a year ago. Well, stuff happened and it never got replaced and now we're starting to se

Long time list members will remember Harold's instructional columns in MRT. He showed how to test systems and and analyze problems in a way that technicians can follow. His book: The Radioman's Manual