Reel To Reel Tapes Released For Consumers


Michael K
 

The use of the terms "2 Track" and "4 Track" was an industry marketing strategy when 4-track (or 1/4 track) tapes were introduced in 1959. It was a way to distinguish between the two formats.  I think it was easier for consumers to imagine 4 separate tracks on a tape (i.e. 4-track) than to imagine what a 1/4 track meant.

It should be noted that, in fact, each track on a 2-track tape occupied about 1/3 of the tape width.


Robert A. Rouge`
 

Technical Note About 1/4" Tape:
Although they were called "Four Track", they were actually "Quarter Track Stereo"
There was "Side 1" and "Side 2".
"Side 1" was tracks 1 and 3.
"Side 2" was tracks 4 and 2.
The left channels 1 and 4 were closest to the edge of the tape

When "Quad Stereo" came out in the Seventies, there were true "Four Track" longitudinal tapes made.


----- Forwarded Message -----

From: Michael K <mkaplan22@...>
To: "reeltoreel@groups.io" <reeltoreel@groups.io>
Sent: Wednesday, May 26, 2021, 7:49:49 PM PDT
Subject: [reeltoreel] FS Art Pepper 3.75 ips

Tested, plays well, with sonics about what you'd expect at 3.75 ips. Box is fair, with split seams.

https://www.ebay.com/itm/294194101402
_._,_._,_