For the 2022 Field Day, the Club that I am member will use the QRUQSP logger. I am working from home - 1E - and will also use. For the FT-8 contacts, the software I use automatically logs the contact.

Hi - just to say I will be putting QRUQSP into service at the school I work at to do a number of things: 1 - Receive data on 868Mhz from our Bresser 5 in 1 Weather station that will give us the extern

Here are some screen shots from my CS-101 WX station(s). I have the Tycon configured for "Outside" data, and the BME for "Inside Data" since the inside data from the Tycon comes from it's internal pan

At present there is no permission for uploading "Photos" or "Files". So here are the current screen shots from my Tycon WX station (433mhz) and the on-board BME sensors. -Ron VE1AIC

I just completed a build of the CS-101 board with on-board BME sensor and plugged in a cheap RTL-SDR on USB for remote. The SDR picked up my 433 mhz signal from a Tycon weather station more than 50ft

can we get a clear picture of the rear panel layout for the project? I for one would like to take a stab at making my own box. Tom VE3THR

We've published the gerber files for PCB manufacturing, https://qruqsp.org/hardware/files The PCB layout was created with the software Fritzing.org. The CS-101 Solder Tutorial is also completed, you c