Good morning Mike, We don’t currently offer a way to import or combine your logs from FT-8. I recommend manually entering your FT-8 contacts using the web interface, the same way you will log your

For the 2022 Field Day, the Club that I am member will use the QRUQSP logger. I am working from home - 1E - and will also use. For the FT-8 contacts, the software I use automatically logs the

Hi Calvin. Thanks for the welcome - I actually started with rtl_433 and trying to get it working with weewx before coming across Andrew's qruqsp project and realised that a lot of the hard work had

I’m looking forward to reading about your progress on this project. I wish I had QRUQSP for my first greenhouse project before we moved to our new house.

Hi - just to say I will be putting QRUQSP into service at the school I work at to do a number of things: 1 - Receive data on 868Mhz from our Bresser 5 in 1 Weather station that will give us the

Looks good! In the weather tab you can combine the 2 stations you have into one so you can see their numbers on the same graphs. Click on the sensor and you can move it to the other station. Andrew

At present there is no permission for uploading "Photos" or "Files". So here are the current screen shots from my Tycon WX station (433mhz) and the on-board BME sensors. -Ron VE1AIC

Here are some screen shots from my CS-101 WX station(s). I have the Tycon configured for "Outside" data, and the BME for "Inside Data" since the inside data from the Tycon comes from it's internal

I just completed a build of the CS-101 board with on-board BME sensor and plugged in a cheap RTL-SDR on USB for remote. The SDR picked up my 433 mhz signal from a Tycon weather station more than 50ft

I've attached the drawing for the back panel. If you'd like the CAD file just let me know. If the attachment gets stripped by groups.io, I have also added it to the files section:

can we get a clear picture of the rear panel layout for the project? I for one would like to take a stab at making my own box. Tom VE3THR

We've published the gerber files for PCB manufacturing, https://qruqsp.org/hardware/files The PCB layout was created with the software Fritzing.org. The CS-101 Solder Tutorial is also completed, you