Is anyone able to run the viewer on Mojave? This is what I get if I try to run it by hand. MacBook-Pro:~ greg$ ~/Documents/EAGLE/ulps/pcb-gcode/viewer/application.macosx/viewer.app/Contents/MacOS/Java

Hey gang, Many long time readers will know I have been around here for quite some time and have been using Eagle and Pcb-gcode to make my boards. For years I have muddled through and made my projects

How does GCODE work with Eagle ? Is it via the gerber files and drill file ? Or does it use Eagle internal files ?

Dear Fellows I used for the last 2 years this software a few times, but always run fine, some months ago when I tried use this my bitdefender show me some warning messages and delete or "destroy" some

dear All, I am new on this topic and have read most topic in regards of pcb-gcode on eagle. yes i am also facing the same problem, i could not able to solve this on eagle. is there any one can assist

Hi! I updated my Eagle to 9.4.2 version and now, I can't get the etching G-code for my signal traces. After generating the G-code I get on the etching preview only the pads but not with the traces. I

I suppose swarf isn't the best word, but I'm curious about how you guys get rid of the chips which lodge in cuts. I've been chasing them out with a needle, buy it's tedious. I've got 90 psi air in the

You may remember a struggle I was having with some traces shorting out. As it turns out, I had converted a library file for a 28 pin DIP from having little round pads to the elongated type which I fin

Need help please I am trying to convert the file to Gerber files but without success Can anyone convert them for me? Many thanks Yoram

Hello comrades! I use pcb-gcode.ulp for some time now and get decent results, probing the copper surface with OpenCNCPilot. But I realized, that the edges of the second+ rounds are not as good as the

I cannot solve this problem on my Windows 10 installed EAGLE 8.6.3. Can't open C:\EAGLE 8.6.3\ulp\viewer\application.windows\data\optimize_me.txt Permission denied I have absolutely no idea how to set

Trying to setup PCBGCODE on a new machine (Windows 10). Got far enough to settings page but can't size the window to see/reach the 'accept' button. Closed it down and just tried 'run' on a board got m

Hi, Please post latest stable entry level versions of eagle/pcb-gcode versions for mac, now that I have a functional CNC mill ?? thx jerico

I have been using optimizer "Optimizer for PCB Gcode. By Daniel Purvis and Jay Couture Version: 1.1 Releases 8/1/2008" But it doesn't work anymore. It brings up a dos box with the input and output pat

Just installed eagle 7.6 and PCBgcode on win10. The PCBgcode files are in c:\users\jim\documents\ulp\pcb-gcode-3_6_0_4 The directories are set as below. When I try to run PCBgcode I get the message as

Made a schematic and then tried the board. Gave autoroute a go and got a reasonable board. Problem is there are areas I have made errors on both the board and schematic. Trying to undo and go back I n

I have been using Eagle and PCB-Gcode for many years now with good results using a cutter to engrave the PCB traces. For the past couple of days I have been trying a slightly different way of using PC

Hi! I'm new here, so pls forgive me if I post this into the incorrect place... Here is my problem: I used Eagle 9.2.0 until a few days. After AutoDesk released the new update 9.2.2 of Eagle I updated.

I'm having great success with Eagle 9.2.2. I make small boards for through-hole components and, so far have been able to get everything on a single layer without jumpers but next project will require