Hi - I've been trying to use pcb-gcode to make finer pitch boards than I am accustomed to, and having trouble getting pads to come out properly sized. To test, I made a new board with a single surface

Hi Mr. Nobody Looking at the first picture it seems that the circle has not been drawn within the pcboard program. Instead use a a very fine eyelet to which you change the diameter and its thickness.

I having some problem when milling circular board. PCB gcode unable to detect circle. As the picture show that I did draw two circular cutout area, but after generate into gcode the circular area is g

I having some problem when milling circular board. PCB gcode unable to detect circle. As the picture show that I did draw two circular cutout area, but after generate into gcode the circular area is g

Passing this on... Begin forwarded message: From: alexander arkusha <yohabi@...> Subject: Drill spot holes SOLUTION Date: November 24, 2017 at 6:56:15 AM EST To: pcbgcode@... Hello! Drilling spot hole

test

Hello everyone! I have been using pcb-gcode for a long time without problems. recently I updated both Eagle and pcb-gcode. That's when I ran into the Javaw not being found problems. Is there a combina

Hi! I recently downloaded the software and after installing and running it according to the documentation I noticed that all images in the menu are missing. they are replaced by a standard "broken ima

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the pcb-gcode group. File : /2Software/pcb-gcode-modified.ulp Uploaded by : pcbgcode <joh

Hi, I have the same problem for short cutting (ex Tuner bracket) Assume it is due to the smallness of the line in comparison with the perimeter of the PCB. Is it a possibility to correct same? In the

Do you have 'generate mill layer' checked in 'setup'?

Im having issue when convert milling layer into Gcode. The pic show the milling layer in eagle and the output Gcode viewer. In GCode viewer show the DC jack milling path is missing when output to the

Where does one find the auto-leveller add on these days? Years ago I made a youtube video showcasing it, and now someone is commenting that the link is broken. The link (https://groups.yahoo.com/neo/g

Anyone have a copy of 3.6.2.4. ? Both places Phorum and here have dead links to the file.

when I try to use pcb-gcode in either 8.0.0 or 8.0.1 of eagle the system goes into an infinite loop after making the first top etch file. most of the time and I have to click the stop button to do any

It occurs to me that i could etch labels on the non copper side of boards. Is anyone here doing that? john

I'm pretty close to having a speedy system for generating one or two-off boards. My interest in getting all the necessary features for one of my boards milled was more directed to generating the G-Cod

Has anybody written a profile for a Piranha FX CNC router? It has limited g-code processing: only G0, G1, G2, G3, M3. M2, F and S. Also it uses ijk format for arcs rather than the R format.

Bingo, cleaning up the board with 800 grit crocus cloth and then acetone produced perfect tinning. I guess the alcohol I used on an earlier board didn't really get all the oil/grease off. Thanks for t

I've now made a board with drilled holes and have milled its circumference with break-out tabs and am pretty satisfied. I also tinned the board with tinning solution which mostly worked, board may not