Can someone tell me how to use the file or program MPASS? It is an exe file but where is the documentation on using it?

For some unknown reason to me when ever I use PCB-gcode now to generate g-code for engraving a pcb I get no Z axis entries on the milling layer. It never use to be this way. This started happening a c

Hi to group: I have been using PCB-Gcode / Eagle for years in XP. I am trying to set it up now under Vista and all the directory changes are making me nuts. When I try to run pcb-gcode.ulp in Eagle, I

Thanks to very generous donations in 2011, web hosting for pcbgcode.org ($120/yr) was paid through 2013. Unfortunately, donations since then don't cover the hosting costs this year. If you could make

Just want to know why i can not find the auto leveller program. thank you, PD

Hi guys, I´m finishing a new spindle and need some advice. Myother spindle works well but I built it too rugged since it was to be used forworking metal as well. I used roller and thrust bearings, mak

Sorry for the ‘spam’ guys but I wanted to let you know that I have put the PreciseBits EM2E8/EM3E8 tapered stub mills on sale. There is a coupon code on the page that will take an additional 20% off t

Hi all, The mill gcode file does not seem to compensate for the bit diameter. Is there a provision somewhere to keep the mill outside the Dimension border? Gaston -- http://public.fotki.com/Gaston-Gag

Hello to everyone, First of all thank you JJ for granting me access to pcb-gcode group, I'm very happy to be part of this group. I just recently acquire my very first CNC and still exploring the thing

Hello, Does anyone own the yoocnc 3020t? I purchased the spindle control unit but there's very little information on how to get this attached to my 3020t. This came in a package along with the 25pin b

Hi Guys! I have been having very good results with a new PCB milling approach I have been using so I thought I would share it with the group. The technique is very simple and is very tolerant of dull

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the pcb-gcode group. File : /MPASS.EXE Uploaded by : sdmonaco <sdmonaco@...> Description

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the pcb-gcode group. File : /CSCALE.EXE Uploaded by : sdmonaco <sdmonaco@...> Description

Hello, I'm printing multiple copies on a single board, how do I cut out? I don't see any border file on the pcb gcode.

Hello, I noticed when I drill, the mach3 refuse to run because of soft limit is enabled. However, I don't see this issue when I run the etch.tap. Both files are generate at the same time. Why does etc

Hello, I've just joined this group. Just learning how to use pcb-gcode. One question, I am working on a project and managed to put all my trace on one side. When I generated the tap files, the traces

Single sided pcb in Eagle V7.2, I ran pcb gcode and there are no drill hole data on the top.drill.tap. Instead, I'm seeing it on bottom.etch.tap file that is mirror flipped. What am I doing wrong? Als

I created a little antenna symbol in my library, it's just 3 small arcs, and put it on the Mill layer. I'd hoped pcb-gcode would output this to the top text file, but it didn't. It doesn't show up in

I encounter a problem that never happened and hope help to found answer/solution. In fact when I start ULP PcbGcode ( all settings are as usual and correct for my use..) the drawing is performing and

Hi All Interested to see yet another report of occasional large jumps (only 2 mm - you lucky man!). This topic has come up many times, strangely always seems to be the X axis. About 18 months back I s