Hi Guys This is my first attempt at using Eagle and PCB_Gcode. I have a very simple 12 keypad with smt resistor network. All was going well and Eagle looks good with top layer as expected with tracks

Can someone remind me what java I need to run the viewer. Could not find docs on this. I'm using Eagle 7.7 on OSX Big Sur. Eagle works fine and pcb-gcode runs and generates files. just no viewer. than

I would like to increase trace and device isolation. i can't find advice on how to do this in the PCBGCODE Manual, so assume this must be something that can be done in Eagle. It looks as though one cu

I am new to Mach 3 setup and commands and I have a question.. Is there a G-code command I can use to populate Tool Table in Mach3 in a way that every tool change the operator can see TOOL DIAMETER in

Hi, Thank you for this great plugin for Eagle :-) It works perfect in combination with my StepCraft CNC mill for pcb projects. I have recently installed Eagle+pcbgcode on a new machine. Everything wor

Hi Well i was able to make a .nc drill file using pcbgcode with Mcnugget6750 as the output to see if that would work on my 3018 cnc, well it seems to be the right format Iam using Candle software ver

Hi All Am just trying to set up pcbgcode on eagle 9.6.2 but the window is to big and i cannot see all the options is there a way to alter this so that i can see it all Thanks Howard

hello to group I have searched the message data base but can't figure out an answer. I draw a square using green layer 46, EAGLE 7.3 I run pcbgcode 3.6.2.4 with milling box checked I get nothing on th

Update on this problem :- 1) Problem exists on all versions of Eagle installed (7.7.0 , 9.6.0 and 9.6.2) 2) Problem only appears if "Top stencil" is run with Bottom outlines" 3) Downloaded a fresh cop

I have a newly designed circuit board using mainly SMD components with just few through hole connectors as well. The board is double sided to allow connection to the TH components, and 1/32" rivets pr

I'm using a MacBook Pro 13", running the latest Eagle and PCB-Gcode. When opening the setup window I am getting a window that runs off the screen. There's also no option to resize the window. Any sugg

Hello. I have been working with eagle and gcode since 2010. My pcb-making-machine setup is an old CNC machine from the soviet era with a big communist three-rack-sized mainframe (PDP11 clone) which I

Hi! I'm new here, so pls forgive me if I post this into the incorrect place... Here is my problem: I used Eagle 9.2.0 until a few days. After AutoDesk released the new update 9.2.2 of Eagle I updated.

Setup: OS OpenSUSE 15.2, Eagle 9.6.2, PCB-GCODE 3.6.2.4 Workflow: New Eagle Project with a single component with a single 2.00x1.00mm SMD pad centred at 20x10mm on board. Run the pcb-gcode ULP and rem

Help, just downloaded pcb-gcode for Eagle and got the directory set up ok but I'm running a Windows8.1 PC and the pcb-gcode Setup is totally off scale for my 1260x768 screen. Can't get to most of the

Hi All, I have been using PCB-GCODE 3.6.2.4 with vector text on the milling layer I get some very strange effects. Delving into the code I noticed that this version of PCB-GCODE the way arcs are drawn

Is there a way to mill circles without building them with arcs? is it possible to mill shapes of different sizes with a smaller tool, (same tool for all holes )? is is possible somehow to mill the dat

Hey guys, So I have basically shyed away from milling boards and just buy perf board and this is why; I can't do a levelling pass with my machine because the software and controller don't cater for th

Inside Eagle ver. 9.6.2 when I run "pcb-gcode Setup" version 3.6.0.4 in the "GCode Style" window no style appears and if I click on the "Accept" button the system responds with an error "Can't open 'C

Hi all- I've had some nice results recently that I thought I'd upload pictures of, but...for the life of me I can't figure out how to create an album and/or upload photos! All I have been able to dete