After a long time to rest, I had try to make a small board, and I found an error that never found before: When type run pcb-gcode an message appear: unable to open the include file source/pcb-gcode.h.

I've been a member of this group for years but until now the commercial side of work-work means I was required to use outside firms to make plated through 4 layer boards. Now I'm pseudo retired and lo

Having used PCB-GCODE for more than 6 years and seen that an new updated Version 3.6.6 was available, I decided to download and give it a try. Not wishing to damage the original running version, I ins

Hey everybody, I am new around the forum as I came across the pcb-gcode UPL. So happy to be here. Since a while I am looking for a new option to generate my own PCB's and I was always wondering if I c

In a moment of being overly generous a few years ago, someone asked if they could register the pcbgcode.com and I agreed. Seventeen minutes later, I regretted it. He was selling some modified version

Bit of a stretch, but several years ago I created a bundle for the Textmate editor that did syntax highlighting for Eagle’s ULP language. And I seem to have lost it. Would any of you happen to have a

Hello Folks, The question recently came up about how pcb-gcode calculates it's toolpath, and why pads aren't isolated when there seems to be plenty of room between. Hopefully, this will help show how

Hello Folks, I've been thinking about and working on the long-requested (ca. 2018) feature that would let one mill holes of different diameters using an endmill. I would like your input. * Is this use

This release implements Harald's code to always conventional mill, leaving better edges. Thanks Harald! Please test if you can. https://github.com/JohnAtl/pcbgcode/releases/tag/v3.6.5-beta Regards, Jo

Hello Folks, This addresses Issue 9 filed by mprowe, where the spot drill depth was used for the second and subsequent drill holes. I've marked it as a prerelease, and would appreciate if some of you

[pcbgcode:master] New Issue Created by mprowe: #9 When generating drill file, first drill OK. Remaing drills use "Spot Drill" depth? Eagle Ver 9.6 PCB_GCODE ver 3.6.3 Repeatable: Yes. Requesting drill

[pcbgcode:master] New Comment on Issue #9 When generating drill file, first drill OK. Remaing drills use "Spot Drill" depth? By mprowe: Hi Harry, I'm not sure that the two problems are the same? Using

[pcbgcode:master] New Comment on Issue #8 corrections and addtions to pcb-gcode By mprowe: I'd like to vote for the "Spot Drill" First Hole / Remaining hole fix. It's always catching me out! Regards,

[pcbgcode:master] New Comment on Issue #8 corrections and addtions to pcb-gcode By JohnAtl: Thanks Harry and Alexander! I’ll have a look. I finished my PhD, so hope to have more time for hobbies now.

[pcbgcode:master] New Issue Created by mprowe: #9 When generating drill file, first drill OK. Remaing drills use "Spot Drill" depth? Eagle Ver 9.6 PCB_GCODE ver 3.6.3 Repeatable: Yes. Requesting drill

[pcbgcode:master] New Issue Created by deHarro: #8 corrections and addtions to pcb-gcode Hi John, seemingly you are on closing issues? So perhaps you should have a short look at my homepage. There I e

Hello Folks, I just created a new release that fixes a couple of long-standing issues. Issue #5 - images sometimes aren’t found for pcb-gcode-setup, which can make the window taller than your screen.

[pcbgcode:master] New Comment on Issue #4 Does PCB-GCode Work with Latest Eagle Version on Mac? By JohnAtl: Yes, it does. You'll want to get the .zip file from here. When you unzip it, be sure that th

[pcbgcode:master] New Issue Created by TSJim: #4 Does PCB-GCode Work with Latest Eagle Version on Mac? Wondering if PCB-Gcode works on Eagle 9.6 on Mac. It seems to throw an error when I try to run it

1 New Commit: [pcbgcode:master] By Johnson, John T <john.johnson@...>: 0e8ae2fc7500: Fixed missing figure files. Ignored Texpad intermediate files, and TeX temp files. Added: docs/figs/04151_lcdi2c.pn