[pcbgcode:master] new issue: When generating drill file, first drill OK. Remaing drills use "Spot Drill" depth? #github


pcbgcode@groups.io Integration <pcbgcode@...>
 

[pcbgcode:master] New Issue Created by mprowe:
#9 When generating drill file, first drill OK. Remaing drills use "Spot Drill" depth?

Eagle Ver 9.6 PCB_GCODE ver 3.6.3 Repeatable: Yes.

Requesting drill only: image First hole is OK, subsequent holes use the "Spot Drill" depth. This is a snippet from drill file.

image

Workaround: Make the "Spot Drill" depth the same as "Drill Depth". And don't forget to return to correct value for "Spotting" while requesting Outlines.

Regards, M.