Pcbgcode install folder should be in the “User Language Programs” table which you can find in: Eaglex.xx > Options > Directories *** As it is highlighted on my system ***

#pcbgcode #eagle

Hi, OK, flying blind here as I am not using Eagle V9.6.2 nor am I using 3.06.0.4 (which I don't even have a copy of), but will start off with asking a dumb question: Have you configured Eagle director

#pcbgcode #eagle

Inside Eagle ver. 9.6.2 when I run "pcb-gcode Setup" version 3.6.0.4 in the "GCode Style" window no style appears and if I click on the "Accept" button the system responds with an error "Can't open 'C

#pcbgcode #eagle

Hi all- I've had some nice results recently that I thought I'd upload pictures of, but...for the life of me I can't figure out how to create an album and/or upload photos! All I have been able to dete

#pcbgcode

I'm beginning to do more double sided boards. Until now I was able to do everything with a single side with maybe one or two jumpers to clear interfering traces. I still want to hold the number of via

#pcbgcode

I have a fully functioning MAXNC 15 CL for sale. Includes the mill which is 4 axis, the software, and DOS computer. Also loaded on the computer is Autocad 13 with software. I am in east Texas but can

#mill #pcbgcode

Jose, Sorry, but this time I don't have a clue as to the situation. I am still using V6.4 for various reasons and therefore am not familiar with problems that may be associated with that version. Mayb

#pcbgcode

Hi Art Sorry to bother you again but a issue with Eagle 9.6.2 that I am using now does not let me doing milling on layer 46. I'm trying to do some adjustments on my panel (no text included) and after

#pcbgcode

Jose, I am not familiar with the "Nugget Mills" but am glad you have it working for you. Good luck and am glad we were able to give you some assistance. Country

#pcbgcode

Dear Art I assume in my falty point of view that this software for technical drawings works on vector lines as Autocad. Again your knowledge and good will help me. But this tricky things are a always

#pcbgcode

Jose, The first thought is, have you done the text in vector format? From the manual: "Text Generates gcode to engrave any vector text that is on the Milling (46) layer." To check, on your board, go t

#pcbgcode

Dear Art Thanks again for your help. But my sad story didn't yet finished. I use a old laptop HP with a centrino duo and windows 8.1 to do this job and connect with my cnc. But when I tried to make te

#pcbgcode

Jose, Glad to hear you got that one fixed (or at least working)! Now to your text problem. Click on the 'I' (info) button on the toolbar and then click on the text that you want to change layer. This

#pcbgcode

Hi Art Thanks for your tip but perhaps because of my older Eagle version didn't work, so I created a new line between the objects and the drawing edge and it works : the newer line does not appear but

#pcbgcode

Jose, Don't worry about your English, your doing fine. Its a lot better than my Portuguese! If your elements are near the edge and not showing up, try moving them in a bit or change your Design Rules:

#pcbgcode

Hi Art Sorry for my poor English. Thanks again you help me a lot, I'm a basic level user of Eagle that is a freeware version and pcbgcode too but I follow your tips and my panel is almost running even

#pcbgcode

Jose, I am not familiar with your term "raws", but am assuming these might be "slots"? If so, you need to put them on the milling layer (46) and be sure in your setup to check the 'Generate milling' b

#pcbgcode

Hi Ark Thanks for helping me. I'm using Eagle 7.5 and pcbgcode 3.6.2.4 on a few projects and it works great. This time I try to make a panel with some raws to install connectors. So I put some alone t

#pcbgcode

Been there and done that, although with toner transfer. They turn out to be rather big, and I used copper ones, IIRC, not brass. They're also not possible to put under SMT chips. I staked mine in firs

#eagle #pcbgcode

Since this great idea did not work out so well, i thought I'd share it. I've come to need to do double sided boards now because my projects need SMD devices, and vias.. I asked around and found that s

#eagle #pcbgcode