|
Re: Conversion to Garber
#eagle
peterg1000
Attempting to load into Eagle 9.4.2 reports your downloaded ".brd" file as not being an Eagle file!!??
If you prepared it with an earlier version and can import into "9.4.x", the is an toolbar icon which will automatically generate all the Gerber files required by any pcb manufacturer. One manufacturer (in China) I have used personally accepted the automatically produced .zip file and made excellent boards from it. Sorry can't be more helpful. Peter
|
|
|
|
Re: Conversion to Garber
#eagle
yoram
Wow
Thanks for the help and support
I downloaded the file from a site - not I created it ( https://github.com/0xPIT/reflowOvenController )
I found another file in the library that only with him, I can open the BRD
Maybe it can help someone help me ...
Many thanks to everyone who made the effort to help Yoram
|
|
|
|
Re: Conversion to Garber
#eagle
Rollfree
Here you have SCH and BRD.
toggle quoted messageShow quoted text
Dne 6.7.2019 v 21:22 yoram napsal(a):
Wow
|
|
|
|
Re: Conversion to Garber
#eagle
peterg1000
Downloaded "O" file and renamed as "O.zip". Imported into Eagle 9.4.2 and prepared CAM file as ".zip" file. This checks out with Gerber viewer on all layers and should be good to go for manufacture.
All the files attached for your information. Peter
|
|
|
|
Re: Conversion to Garber
#eagle
peterg1000
F.Y.I download Gerberlogicx from their website to view Gerber files directly from dated .zip file (attached to previous reply).
Peter
|
|
|
|
Re: Conversion to Garber
#eagle
Patrick
I would recommend to watch my video first before you order the PCB 😋
|
|
|
|
Re: Conversion to Garber
#eagle
yoram
Well
Thank you all for your help
Special thanks to Patrick
After this video I realized that the project was not really ready for production
And accordingly. Not going to build it
It's a shame that I have already ordered all the components :(
If someone knows a similar project that can be built, I would thank him best regards Yoram
|
|
|
|
JimmyB
Hi Peter, my name is Jim, and I reading your post about spot drill holes. The word in your article "pcgcode"
should read pcbgcode ? Sorry about if i'm wrong, but my etching gcode file not placeing spot drill holes. Try to find answares all ove the net to my problem, no luck. It also doesn't generate drill and mill files. It shows this error "Improperly formatted rack entry" . I had to reinstall windows10 ever since this problem showed up. Before had no problem at all useing Eagle 7.0.6 and Pcb-gcode 3.6.2.4 try to use different drillrack files, but reading your posting this shouldn't be my problem. Sorry to bother you all of this, but I'm trying to find solution for this problem. Any help or idea would be appreciated. Best regards.
|
|
|
|
Re: removing trace isolation swarf
#mill
#development
mariob_1960@...
Hola John, a pesar de mi pequeño conocimiento de programación, consigo progresos. Volviendo al tema del uso de dos fresas, la preocupación es la siguiente, si me puede guiar: ¿en qué archivo trabajar para ver cómo se generan y pueden modificar las rutas, pcb-gcode.ulp?
El objetivo es:
1- Principal: Obtenga el diagrama de intersección en las rutas generadas por la superposición (es decir, lo que su programa elimina cuando realiza una unión sólida de dos islas con bits de gran diámetro)
Esto ya tendría más del 60% de la meta alcanzada.
2- Generar archivo con nombre de intersección.
3- El siguiente paso debe hacer una diferencia entre lo que se obtuvo y la ruta de
bit mínimo
En el peor de los casos, podría trabajar en esto desde bcnc con python
Como te dije, el objetivo que he logrado funciona bien para algunos rastros, pero es demasiado lento para una pequeña PCB
Te consulto: ¿Tu software funciona solo dentro de Eagle, o puede funcionar en diferentes programas que generan Gerber?
Lo siento si no era el lugar adecuado para estas consultas.
Abrazo mario
|
|
|
|
Re: removing trace isolation swarf
#mill
#development
mariob_1960@...
Hi John, despite my little programming knowledge, I get progress. Returning to the issue of using two strawberries, the concern is the following, if you can guide me: on what file to work to see how the routes are generated and able to modify, pcb-gcode.ulp?
The objective is:
1- Main: Obtain the intersection plot on the routes generated by overlap (that is, what your program eliminates when you make solid union of two islands with large diameter bits)
This would already have more than 60% of the goal achieved.
2- Generate file with intersect name.
3- The next step should make a difference between what was obtained and the route of
minimum bit
In the worst case, I could work on this from bcnc with python
As I told you, the objective I have achieved, it works well for few traces, but it is too slow for a small pcb
I consult you: Does your software work only within Eagle, or can it work on different programs that generate Gerber?
Sorry if it was not the right place for these queries.
Hug Mario.
|
|
|
|
Christian Robert Adzic
Hi! I updated my Eagle to 9.4.2 version and now, I can't get the etching G-code for my signal traces.
|
|
|
|
richi richardo
dear All,
I am new on this topic and have read most topic in regards of pcb-gcode on eagle. yes i am also facing the same problem, i could not able to solve this on eagle. is there any one can assist me ? when i am putting the path for Ulps directory, later i am start eagle from begining again, try to open the board and run the ULP Button but appears like this : So after that i do close the warning window and it appears PCB Gcode window but with empty file coloumn as shown here : just like that, and after i press ACCEPT button,.... well,.. nothing shown anymore, and just gone,... no continuity of the result and i am remain on confusion,.. have tried to google from any sides of the world but i could not able to find the good information, and now i am finnaly reach this group with full hopes somebody can give me help to solve this issue. Many thanks in advance for any ones who can try to help me pleaseeee... pleaseee.... rc-man
|
|
|
|
chrisga63
Good evening to you. Pcb-gcode 3.2.6.4. works well with me with the older version of Eagle 7.7.7. with the newer versions it presents to me exactly the problem you described. chris
Στις Παρασκευή, 20 Σεπτεμβρίου 2019, 04:05:17 μ.μ. EEST, ο χρήστης richirichardo via Groups.Io <richirichardo@...> έγραψε:
dear All, I am new on this topic and have read most topic in regards of pcb-gcode on eagle. yes i am also facing the same problem, i could not able to solve this on eagle. is there any one can assist me ? when i am putting the path for Ulps directory, later i am start eagle from begining again, try to open the board and run the ULP Button but appears like this : So after that i do close the warning window and it appears PCB Gcode window but with empty file coloumn as shown here : just like that, and after i press ACCEPT button,.... well,.. nothing shown anymore, and just gone,... no continuity of the result and i am remain on confusion,.. have tried to google from any sides of the world but i could not able to find the good information, and now i am finnaly reach this group with full hopes somebody can give me help to solve this issue. Many thanks in advance for any ones who can try to help me pleaseeee... pleaseee.... rc-man Attachments:
|
|
|
|
The
On 20 Sep 2019, at 14:22, chrisga63 via Groups.Io wrote:
|
|
|
|
richi richardo
hI jOHN, Thanks for the reply, i am still try to figure out this, and by installing the eagle version 7.7.0, yes I can successfully install it, but when i am running it keeps producing G Code, showing the View and poop up windows said " after you finish viewing this window please close back the window". later when i am close it, nothing happened again, i am trying to fidn where is the G Code file being produce in my Eagle Folder, but no found anything about this G Code. Do you have any idea, why it;s behave like this ? Regards, Richi Richardo
On Friday, September 20, 2019, 07:29:34 PM GMT+1, John Johnson <john@...> wrote:
The On 20 Sep 2019, at 14:22, chrisga63 via Groups.Io wrote:
|
|
|
|
chrisga63
The file of g-code entered into the file of circuit and psb board Take a look at the photos below to understand. chris
Στις Τρίτη, 24 Σεπτεμβρίου 2019, 03:28:58 μ.μ. EEST, ο χρήστης richi richardo via Groups.Io <richirichardo@...> έγραψε:
hI jOHN, Thanks for the reply, i am still try to figure out this, and by installing the eagle version 7.7.0, yes I can successfully install it, but when i am running it keeps producing G Code, showing the View and poop up windows said " after you finish viewing this window please close back the window". later when i am close it, nothing happened again, i am trying to fidn where is the G Code file being produce in my Eagle Folder, but no found anything about this G Code. Do you have any idea, why it;s behave like this ? Regards, Richi Richardo
On Friday, September 20, 2019, 07:29:34 PM GMT+1, John Johnson <john@...> wrote:
The On 20 Sep 2019, at 14:22, chrisga63 via Groups.Io wrote:
|
|
|
|
José Luis
Dear Fellows I used for the last 2 years this software a few times, but always run fine, some months ago when I tried use this my bitdefender show me some warning messages and delete or "destroy" something in Gcode. Now on my designed boards on Eagle when I try to run pcb-gcode no "black" windows appears but in bin I found only bot.drill. file. Can some of you help me here? My very thanks in advance. Jose Santos
|
|
|
|
#GCODE
#gcode
How does GCODE work with Eagle ?
Is it via the gerber files and drill file ? Or does it use Eagle internal files ?
|
|
|
|
Re: #GCODE
#gcode
Art Eckstein
My understanding is it uses the internal files and spits out the Gcode according to which profile you use. You do not export the gerber or drl files at all.
toggle quoted messageShow quoted text
Country Bubba
At 11/1/2019 05:03 PM, @nigel7557nigelwright7557 via Groups.Io wrote:
How does GCODE work with Eagle ?
|
|
|
|
Re: #GCODE
#gcode
Gregory Wood
If one does not have automatic tool change can the output be just etching or drilling. So if ran twice with different option each operation can be done independently?
toggle quoted messageShow quoted text
On Nov 1, 2019, at 4:23 PM, Art Eckstein via Groups.Io <art.eckstein=gmail.com@groups.io> wrote:
|
|
|
