[pcbgcode:master] New Comment on Issue #9 When generating drill file, first drill OK. Remaing drills use "Spot Drill" depth? By deHarro: Hi M.!You might try the fix from Alexander Arkusha explained

Bit of a stretch, but several years ago I created a bundle for the Textmate editor that did syntax highlighting for Eagle’s ULP language.And I seem to have lost it.Would any of you happen to have a

[pcbgcode:master] New Issue Created by TSJim: #10 Using PCB-Gcode in Fusion 360? I'm trying to use PCB-Gcode in Fusion 360. I have installed PCB-Gcode 3.6.2.4 it into the same directory as the rest

[pcbgcode:master] New Comment on Issue #8 corrections and addtions to pcb-gcode By skybox53: Congratulations on the educational accomplishment. Very much admire the tenacity! Roger

[pcbgcode:master] New Issue Created by mprowe: #9 When generating drill file, first drill OK. Remaing drills use "Spot Drill" depth? Eagle Ver 9.6PCB_GCODE ver 3.6.3Repeatable: Yes. Requesting drill

[pcbgcode:master] New Comment on Issue #8 corrections and addtions to pcb-gcode By JohnAtl: Thanks! [pcbgcode:master] Issue #4 Does PCB-GCode Work with Latest Eagle Version on Mac? closed by

[pcbgcode:master] New Comment on Issue #8 corrections and addtions to pcb-gcode By mprowe: I'd like to vote for the "Spot Drill" First Hole / Remaining hole fix. It's always catching me

[pcbgcode:master] New Comment on Issue #8 corrections and addtions to pcb-gcode By JohnAtl: Thanks Harry and Alexander!I’ll have a look. I finished my PhD, so hope to have more time for hobbies

[pcbgcode:master] New Issue Created by deHarro: #8 corrections and addtions to pcb-gcode Hi John, seemingly you are on closing issues? So perhaps you should have a short look at my homepage. There

thanks much. john ferguson

Hello Folks, I just created a new release that fixes a couple of long-standing issues. Issue #5 - images sometimes aren’t found for pcb-gcode-setup, which can make the window taller than your

[pcbgcode:master] New Comment on Issue #4 Does PCB-GCode Work with Latest Eagle Version on Mac? By JohnAtl: Yes, it does.You'll want to get the .zip file from here.When you unzip it, be sure that the

[pcbgcode:master] New Issue Created by TSJim: #4 Does PCB-GCode Work with Latest Eagle Version on Mac? Wondering if PCB-Gcode works on Eagle 9.6 on Mac. It seems to throw an error when I try to run

1 New Commit: [pcbgcode:master] By Johnson, John T <john.johnson@...>: 0e8ae2fc7500: Fixed missing figure files. Ignored Texpad intermediate files, and TeX temp files. Added:

1 New Commit: [pcbgcode:master] By Johnson, John T <john.johnson@...>: 9dd74a867b48: Strange happenings. Fingers crossed that this is 3.6.2.4. Added: README Added:

[pcbgcode:master] New Comment on Issue #3 Mismatch between ULP and settings files versions - won't run By JohnAtl: Thanks for reporting this!I'll try to have a look soon.

[pcbgcode:master] New Issue Created by howiemnet: #3 Mismatch between ULP and settings files versions - won't run The settings files (particularly pcb-machine.h) have been updated with new

Hi John, I just see, that the code you uploaded to Github seems to actual be V3.6.0.1, as stated in the header portion of "pcb-gcode.ulp". The version I have on my machine is of 2014 (plus my

Hi John, I compared the files on Github to the files I have on my computer, both denoted as V3.6.2.4. I found, that "my" "pcb-gcode.ulp" is at least heavily commented, compared to the one in your

Personally, I'm on some Discourse forums, and on some Discord channels, and they work well, but are a lot of work (well, I know they are non-zero) and I don't know how much return you'd see. Now