Re: Error Codes ?? #pcbgcode


Howard632
 

Hi
Thanks for that mate
will give it a go tomorrow

Howard

On 28 October 2021 at 15:04 MC Briers <mcbriers@...> wrote:

Howard

Here is what you need in your drill file, as far as I understand.  You will have to do the formatting (tabs & spaces, as written in the instructions at the top of the sample file.

T01 0.300 0.000mm 0.300mm 38.100mm
T02 0.400 0.301mm 0.400mm 38.100mm
T03 0.500 0.401mm 0.500mm 38.100mm
T04 0.600 0.501mm 0.600mm 38.100mm
T05 0.700 0.601mm 0.700mm 38.100mm
T06 0.800 0.701mm 0.800mm 38.100mm
T07 0.900 0.801mm 0.900mm 38.100mm
T08 1.000 0.901mm 1.000mm 38.100mm
T09 1.100 1.001mm 1.100mm 38.100mm
T10 1.200 1.101mm 1.200mm 38.100mm
T11 1.300 1.201mm 1.300mm 38.100mm
T12 1.400 1.301mm 1.400mm 38.100mm
T13 1.500 1.401mm 1.500mm 38.100mm
T14 1.600 1.501mm 1.600mm 38.100mm
T15 1.700 1.601mm 1.700mm 38.100mm
T16 1.800 1.701mm 1.800mm 38.100mm
T17 1.900 1.801mm 1.900mm 38.100mm
T18 2.000 1.901mm 2.000mm 38.100mm
T19 3.050 2.001mm 3.050mm 38.100mm

Have fun and go drill those holes!

MC

On Thu, Oct 28, 2021 at 3:50 PM Howard632 via groups.io <howard632= virginmedia.com@groups.io> wrote:
Hi
These are the only drill bits i have all are mm:
.3
.4
.5
.6
.7
.8
.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2.0
3.05

but when i try to make a drill file it tells me its not correct, and its doing my damn head in lol

Howard


 

Join pcbgcode@groups.io to automatically receive all group messages.