toggle quoted messageShow quoted text
That's correct. The pour works like a ground plane pour, isolating itself from existing tracks by some increasing amount. The pour is then processed as polygonal line segments by pcb-gcode to generate the g-code movements for mechanical etching.
If the pour isn't happening, the whole process fails.
On Jul 29, 2020, 8:33 PM -0400, joeaverage <joe.average@...>, wrote:
"What does the screen look like when the etch files are being created? Do you still see the progressive outlines around the tracks?"
No, the displays flickers briefly as if it's doing the calculations and a 'Pour panel' briefly shows, the panel is part of the new Fusion interface .
Now that you have me thinking about what I see I'm wondering if the 'Pour', being the rectangle of the PCB outline needs to be defined
BEFORE the ulp can generate the Gcode? In which case the Pour panel which has the choice data needs to be active BEFORE the ulp runs?
From: firstname.lastname@example.org <email@example.com> on behalf of John Johnson <john@...>
Sent: Thursday, 30 July 2020 10:28 AM
To: firstname.lastname@example.org <email@example.com>
Subject: Re: [pcbgcode] PCB-Gcode in Fusion 360 #pcbgcode
What does the screen look like when the etch files are being created? Do you still see the progressive outlines around the tracks?
On Jul 29, 2020, at 5:23 PM, joeaverage <joe.average@...> wrote:
I have used PCB-Gcode extensively with EAGLE over a number of years but have recently decided to migrate to Fusion 360.
The electronics/PCB package is very closely related to EAGLE and I have found that it is as easy to use after adjusting to the new interface.
With Fusion all your projects are stored on the cloud, whereas with EAGLE they are stored on your local hard-drive. While there are a number
of ulp's on the cloud pcb-gcode is not among them. It is intended (by Autodesk) that such a ulp will be stored locally.
I have loaded the pcb-gcode ulp to the Doucuments/Fusion360/ulps (on my local PC) file which is provided for use. I have been
able to run the ulp and it generates the required files but the top.etch and bot.etch files are empty despite the .drill and .mill files
being complete with comments, line numbers and compliant Gcode.
Can anyone suggest a reason that good .dill and .mill files are produced but not .etch files?