1. pcbgcode@groups.io

Re: how do I get holes cut in board? #eagle #pcbgcode #mill

John Ferguson
 

Thanks much. great idea. i'll try it.

john

On 1/16/19 5:46 PM, Ken McNabb wrote:
John,

I experienced a similar problem in EAGLE 7.7 as well. From what I can find is that the milling layer does not recognise holes as routing paths.
Something I haven't tried yet is the make to hole with two 180 degree arcs. I suspect this will work from my experience with arcs on other boards.

Ken

Join pcbgcode@groups.io to automatically receive all group messages.