Re: How to etch a powerplane with pcb-gcode? #etch
toggle quoted messageShow quoted text
A 1/8” end mill has the same size shank as a V bit (typically), so perhaps more convenient than a 2mm or 3mm bit. Although ER11A collets are designed to close up 0.5mm, I found it somewhat difficult to get a 3mm shank tight in a 1/8” collet..
From: email@example.com [mailto:firstname.lastname@example.org] On Behalf Of Christian Robert Adzic
One of these solutions will solve my problem.
I think also does engraving a large area of copper with a V carve bit will take too much time.