Re: Autoleveler on tb6560

Ivan de Jesus Deras Tabora
 

By looking your video I see you specify pin 15 as Home Z, but it you should be "Probe In", maybe that's the problem.

Regards,
Iván


On Mon, Jun 23, 2014 at 6:31 PM, theguytrain1@... [pcb-gcode] <pcb-gcode@...> wrote:
 

take a look at that video and could you tell me what I'm doing wrong.
I have setup the switch to be in pin 17 and the machine moves but I can't set z axis home.
and also check the continuity on the wires and they are working.
the switcher I connect on the 5 pins connection.
I took on reference a information I found on the Internet that it said

1  X axis limit
2  Y axis limit
3  Z axis limit <--------
4  Estop                  | switch
5  GND         <---------


when I'm setting the switch I choose home Z should, I choose other option or that one is good ??

look the video here autoleveler in TB6560 with linuxcnc 2.5.4

autoleveler in TB6560 with linuxcnc 2.5.4
something wrong with this configuration ???
Preview by Yahoo

 


Join pcbgcode@groups.io to automatically receive all group messages.