Note: groups.io will be down for maintenance this evening, starting at 11pm Pacific Time (6am Tuesday 8/3/2020 UTC), for up to two hours.
Re: Autoleveler on tb6560 [1 Attachment]
The Guy Train 1
take a look at that video and could you tell me what I'm doing wrong.
I have setup the switch to be in pin 17 and the machine moves but I can't set z axis home.
and also check the continuity on the wires and they are working.
the switcher I connect on the 5 pins connection.
I took on reference a information I found on the Internet that it said
1 X axis limit
2 Y axis limit
3 Z axis limit <--------
4 Estop | switch
5 GND <---------
when I'm setting the switch I choose home Z should, I choose other option or that one is good ??
look the video here autoleveler in TB6560 with linuxcnc 2.5.4