Date   

Re: Coots Electronics Workshop, March 21st

 

So all we need to do is set up an AM radio station for Dan to zero in on with an old transistor radio. Coot talk radio? ;o)

On 1/27/2020 5:47 PM, john a wrote:
A simple AM radio with a ferrite rod antenna works!
--
John <@Jkohnen>
Familiarity breeds contempt. How accurate that is. The reason we hold truth in such respect is because we have so little opportunity to get familiar with it. (Mark Twain)


Re: Coots Electronics Workshop, March 21st

johnacord
 

A simple AM radio with a ferrite rod antenna works!

John Acord


Re: Coots Electronics Workshop, March 21st

Jim Young
 

He may have one John.


On Mon, Jan 27, 2020 at 4:11 PM John Kohnen <jkohnen@...> wrote:
We'll set up a longwave radio station at the Boathouse and you can use
your radio direction finder to home in on us. <g>

On 1/27/2020 12:21 AM, Dan in Almostcanada wrote:
> John.  I’d like to come to your charting workshop, but I’d prolly get
> lost trying to find it.  Dan.

--
John <jkohnen@...>
I must say I find television very educational. The minute somebody turns
it on, I go to the library and read a good book. (Groucho Marx)






--
Jim Young,
mostly retired
Somers, MT


Re: Coots Electronics Workshop, March 21st

 

We'll set up a longwave radio station at the Boathouse and you can use your radio direction finder to home in on us. <g>

On 1/27/2020 12:21 AM, Dan in Almostcanada wrote:
John.  I’d like to come to your charting workshop, but I’d prolly get lost trying to find it.  Dan.
--
John <@Jkohnen>
I must say I find television very educational. The minute somebody turns it on, I go to the library and read a good book. (Groucho Marx)


Re: Coots Electronics Workshop, March 21st

Dan
 

John.  I’d like to come to your charting workshop, but I’d prolly get lost trying to find it.  Dan.


Re: Coots Electronics Workshop, March 21st

 

Your laptop doesn't have to know where you are to plan voyages, set waypoints and set up routes. After you get that done, you plug the pocket GPS into a USB port on the computer and transfer the data from the computer to the GPS. You'd go mad trying to do all that on the handheld! <g>

It's easier to do waypoints and routes on a tablet, a phone would be somewhere in between. It's still easiest to do the planning stuff on a "real" computer and transfer it to the mobile device.

What model is you GPS, Rich? Some ancient ones might not work with modern nav programs...

On 1/26/2020 4:21 PM, Rich G wrote:
Does that CPN seem to suggest a laptop will have a GPS potential within it? I don’t think my laptop, Mac Air Pro, has GPS within.
...
--
John <@Jkohnen>
I have never in my life learned anything from any man who agreed with me. (Dudley Field Malone)


Re: Coots Electronics Workshop, March 21st

Richard Green
 

Does that CPN seem to suggest a laptop will have a GPS potential within it? I don’t think my laptop, Mac Air Pro, has GPS within.

As regards cylinders, I tell folks I’m as good as I’ll ever be again and pretty sure that’s accurate. Of course, I also tell the younger ladies, “Hi, I’m Rich”. Hasn’t worked so far but a guy can hold out hope…..

Rich

On Jan 26, 2020, at 2:15 PM, John Kohnen <@Jkohnen> wrote:

Only hitting on four cylinders. What's going on with the other two -- ignition? valves? ;o) I hope your mechanics get you back on the road soon.

Technology has moved on a ways from small handheld GPSes. The workshop will mostly be about navigating using cell phones or tablets, but bring your wee GPS over and we'll try to teach you how to put waypoints into it. Hint: It's much easier to use a nav program on your home computer to plan your voyage and set your waypoints, then load them into the GPS. OpenCPN is a free one, and it's got easier to use:

https://opencpn.org/

The version for mobile devices will be one of the nav programs I'll be talking about in my portion of the proceedings. Maybe I should cover the PC version too, since it's always easier to plan voyages on a "real" computer.

The other program I'll talk about is the mobile device version of Navionics:

https://www.navionics.com/

Six cylinders? I thought you were a straight eight, Rich. ;o)

https://bringatrailer.com/listing/1947-buick-super/

On 1/26/2020 1:22 PM, Rich G wrote:
Sent an email to a guy on here in which I suggested I’m operating on all cylinders now what with repairs and new parts off the shelf but in retrospect I’m really only operating on four of six cylinders. Still, enough to get me around town, so to speak.
--
John <@Jkohnen>
Women and cats will do as they please, and men and dogs should relax and get used to the idea. (Robert A. Heinlein)




Re: Coots Electronics Workshop, March 21st

 

Only hitting on four cylinders. What's going on with the other two --
ignition? valves? ;o) I hope your mechanics get you back on the road soon.

Technology has moved on a ways from small handheld GPSes. The workshop will mostly be about navigating using cell phones or tablets, but bring your wee GPS over and we'll try to teach you how to put waypoints into it. Hint: It's much easier to use a nav program on your home computer to plan your voyage and set your waypoints, then load them into the GPS. OpenCPN is a free one, and it's got easier to use:

https://opencpn.org/

The version for mobile devices will be one of the nav programs I'll be talking about in my portion of the proceedings. Maybe I should cover the PC version too, since it's always easier to plan voyages on a "real" computer.

The other program I'll talk about is the mobile device version of Navionics:

https://www.navionics.com/

Six cylinders? I thought you were a straight eight, Rich. ;o)

https://bringatrailer.com/listing/1947-buick-super/

On 1/26/2020 1:22 PM, Rich G wrote:
Sent an email to a guy on here in which  I suggested I’m operating on all cylinders now what with repairs and new parts off the shelf but in retrospect I’m really only operating on four of six cylinders.  Still, enough to get me around town, so to speak.
--
John <@Jkohnen>
Women and cats will do as they please, and men and dogs should relax and get used to the idea. (Robert A. Heinlein)


Re: Coots Electronics Workshop, March 21st

elaineginader
 

This all sounds great to me. I would like to start the list of participants. 


On Sun, Jan 26, 2020, 1:58 PM John Kohnen <jkohnen@...> wrote:
That's the idea. The Megalopolitan Coots will have to start at the crack
of dawn to get to Toledo by ten, but they're a hardy bunch. <g>

We should make people register for the workshop, so we'll know how big
of a space we'll need to carve out in the Boathouse, and otherwise get
prepared...

On 1/26/2020 9:53 AM, David G wrote:
> Sounds good. Give the Portland contingent time to get there... assuming
> we manage it.

--
John <jkohnen@...>
Literally no man has more wholly outlived life than I. And still it's
good fun. (Robert Louis Stevenson)





Re: Coots Electronics Workshop, March 21st

 

That's the idea. The Megalopolitan Coots will have to start at the crack of dawn to get to Toledo by ten, but they're a hardy bunch. <g>

We should make people register for the workshop, so we'll know how big of a space we'll need to carve out in the Boathouse, and otherwise get prepared...

On 1/26/2020 9:53 AM, David G wrote:
Sounds good. Give the Portland contingent time to get there... assuming we manage it.
--
John <@Jkohnen>
Literally no man has more wholly outlived life than I. And still it's good fun. (Robert Louis Stevenson)


Re: Coots Electronics Workshop, March 21st

Richard Green
 

Sent an email to a guy on here in which  I suggested I’m operating on all cylinders now what with repairs and new parts off the shelf but in retrospect I’m really only operating on four of six cylinders.  Still, enough to get me around town, so to speak.

Rich

On Jan 26, 2020, at 9:53 AM, David Graybeal via Groups.Io <harbordavid@...> wrote:

Sounds good. Give the Portland contingent time to get there... assuming we manage it.


Re: Coots Electronics Workshop, March 21st

David Graybeal
 

Sounds good. Give the Portland contingent time to get there... assuming we manage it.


Re: Coots Electronics Workshop, March 21st

Richard Green
 

Is FINALLY figuring out how I might use my remaining handheld GPS to set and retrieve waypoints likely to be covered? Or should I be looking locally for specific help? I mean, I’ve had this unit and one other unit for years and have done speed over ground and location and such but never figured out the waypoints. I confess I’m not good with reading directions, more of a visual learner I guess.

Horribly chagrined,

Rich

On Jan 25, 2020, at 2:46 PM, John Kohnen <@Jkohnen> wrote:

We'll better know when the workshop will start after we nail down the curriculum. But it won't be at the crack of dawn. More likely about 10:00.

On 1/24/2020 4:47 PM, Elaine wrote:
Around what time on Saturday?
--
John <@Jkohnen>
I know there's a proverb which that says "to err is human", but a human error is nothing to what a computer can do if it tries. (Agatha Christie)



Re: Help with a Hobie Cat

 

Thanks, Case. I passed that on to them. There are Hobie sailors, and other "beach cat" sailors, on Fern Ridge, and I hope I can shake a few loose who are willing to help.

On 1/17/2020 2:03 AM, Case wrote:
They should get in touch with Hobie fleet 72 in PDX.
There is also a place in Hood River (can’t remember the name) that offers Hobie lessons and classes on rigging sailing etc.
--
John <@Jkohnen>
You can safely assume that you've created God in your own image when it turns out that God hates all the same people you do. (Anne Lamott)


Re: Lon

 

I'm sorry, Teri. He shouldn't have had to go so young. We'll sure miss him.

Please check the Coot Calendar when scheduling a memorial service, so it doesn't conflict with anything. The library messabout next month will now be a bit of a wake too... <sigh>

On 1/24/2020 7:06 AM, Teri wrote:
Lon passed away last night. Andy Linn was able to stop by before he went. Quinn and I will figure out a memorial service and I’ll let the Coots know the details.
--
John <@Jkohnen>
I have always imagined that Paradise will be a kind of library. (Jorge Luis Borges)


Re: Coots Electronics Workshop, March 21st

 

We'll better know when the workshop will start after we nail down the curriculum. But it won't be at the crack of dawn. More likely about 10:00.

On 1/24/2020 4:47 PM, Elaine wrote:
Around what time on Saturday?
--
John <@Jkohnen>
I know there's a proverb which that says "to err is human", but a human error is nothing to what a computer can do if it tries. (Agatha Christie)


Re: Coots Electronics Workshop, March 21st

elaineginader
 

Around what time on Saturday?


On Thu, Jan 23, 2020, 11:58 PM John Kohnen <jkohnen@...> wrote:
We're gonna have a workshop/seminar/whatever at the Toledo Boathouse on
proper VHF radio usage, "coastal navigation in the age of the cell
phone", an overview and comparison of electronics navigation programs.
And maybe more.

I think Toledo Joe is gonna do the radio usage part, perhaps with help
from Bo Neill, who coordinated the support boats during last year's
Salish 100 and has been "volunteered" to do a radio usage presentation
before this year's S100. Bo will be there anyway watching Joe and
learning how a master does it. <g>

Bob L is gonna do a session on how to properly use electronic navigation
aids while still being aware of the real world outside the boat. This
will undoubtedly include a bit of paper chart use, or at least service
station road maps. <g>

My contribution will be on using electronic navigation programs on
tablets and cell phones. It won't be so much me teaching, or preaching,
but more me trying to get other attendees to share their experiences, or
ask for help using the programs. We'll probably stick to two cheap
programs: Navionics and OpenCPN.

Suggestions for other topics are welcomed. If you'd like to do a
presentation yourself, that's even more welcome!

But we're only gonna get serious one day, Saturday. Moorage at the
transient docks in Toledo is free, but you're encouraged to make a
donation to the Boathouses. Vehicle camping is free in the parking lot.
Some of us will be arriving in Toledo Friday and making a weekend of it.
The tides are favorable for a boat trip upriver for lunch on Sunday.

There's real good pizza across the street. :o)

Should be a fun and educational weekend.

--
John <jkohnen@...>
The sea washes off all the woes of men. (Joshua Slocum)





Re: Lon

David Graybeal
 

Teri - so sorry to hear of Lon's passing. 


I will miss our Friend Lon

Case Turner
 

Like Andrew I first met Lon at a Summer Solstice messabout. The 2005 messabout. It was memorable in many ways. Cootinering a fix for Greg's stuck center board in his sailboat. Jetman Dan's water jet powered Dont Panick. And the real panid waking up in the middle of the night to water at tents edge and missing boats, paddles, and a knotted up mess of boats after Bonneville let our more water than expected.

I liked Lon's stories and his knowledge of work in the ship yards, I will miss waking up to find a late night Face book post from Lon on some odd engineering work of wonder he found and wanted to share. I will miss working my mind against him playing words with friends.

Fair winds and Smooth Sailing Lon you will be missed.

Case


My first meeting with Lon

Andrew Linn
 

I first met Lon at the Solstice messabout at Quinn's Cove in 2006 (time flies, don't it?)  There was a barge down at the dock where we had food and the Coots sailed, paddled, and rowed over to Caterpillar Island. Myles Tweet let me try out his Sea Bike.

That first encounter is kind of hazy for me, I don't remember much of the details. I do remember Lon being a big man who laughed and told stories.

I'm so happy he met and married Teri. Quinn is a fine young man, and Lon helped and befriended many, many people. Measure success any way you want. Lon did a it well.

I truly wish I hadn't let politics get in the way of our conversations. Reach out. Make contact.