Re: Glue, caulk, Strip Planking on small craft, Some Observations

Julius Dalzell


I should never mess around with the web. As the internet continues to decay, no manner of ‘stuff’ may occur.

The previous incomplete e-mail showed two nondescript images.

So hopefully the above three photos complete the picture (npi).

The far right image shows something coming out of the fog. Second image – there it is! Third – sun is out!

This sequence was taken standing at River’s edge over an amazingly short time period.

Not responsible what the viewer may receive.




Sent from Mail for Windows 10


From: Julius Dalzell
Sent: Monday, January 13, 2020 10:08 AM
Subject: Re: [oregoncoots] Glue, caulk, Strip Planking on small craft, Some Observations


Work with Brightside frequently. VOC’s are intolerable for me. Fully masked for the moment the can is opened!

However I have noted that the VOC loadings have substantially lessened over the past year ort so.

Th manufactures are well aware of the negatives and constantly work on chemistries to achieve improvements.



Sent from Mail for Windows 10


From: Electri-Cal
Sent: Monday, January 13, 2020 8:03 AM
Subject: Re: [oregoncoots] Glue, caulk, Strip Planking on small craft, Some Observations


You can add me to the list you put up.  No bad acting stuff there, maybe black hands if some PL gets loose, but don't build in good clothes anyhow, that's what the old shop clothes are for.  System 3 is a bit spendy, but there are others that do as well, any good paint dept. can advise on that.  Waterborne epoxy is great stuff, I find that a couple clear coats over lightly sanded main finish makes maintenance a no brainer.  Dock or brush scrapes get a light sand and touch up without having a color coat to touch up, the whole finish stays brighter and UV protected as well.


Lter Coots,   Cal


PS, --- Second new hip is sweet, spring will be a ton better this year. 





On Sun, Jan 12, 2020 at 9:37 PM Randy Torgerson <coots@...> wrote:

RiversWest put on the family boat build at the Portland Wooden Boat Festival every year and we have the families use Loctite PL Premium to glue up the boats.  The design is the Salt Bay Skiff. The stuff is easy to work with, will turn your skin black and dries rock hard. I tell the families that I am coaching to use gloves, clean up the excess and don't get the stuff on your clothes as it won't come out. 

I prefer working with epoxy over polyurethane in all its foams.  What I really want is a waterbased epoxy. Most of the paints that I use now, including marine paint, is water based.  I painted my little Chris Craft pram using Brightsides and I hated working with all the solvents. Fish Taco, my Candle Fish 13, was painted with System Three WR LPU, a water based polyurethane catalyzed paint which I found easy to use.





Thanks, I will reply to all mail as possible ---  Cal



Join to automatically receive all group messages.