onlinesewing-janome@groups.io

Recommendation for used sewing & embroidery machine 11

I currently have a MC 12000 (that I bought used at my Janome dealer in 2014). I may be in the market for another sewing/embroidery machine since my hubby has brought it up :) If I can buy another used

By Sharron Brittingham ·

Needle alignment

I have my 9450 back and it is now perfectly aligned. I did our Block of the Month yesterday and used both the HP foot and the 1/4 quilting guide foot. The HP foot was dead on. Then I went to the Patch

By Pixey ·

MC12000-Yellow "star" 4

What does the Yellow 'star' mean on my MC12000? See attached photo. I've been unable to use the favorite Stitch Adjustment functionality and noticed the yellow "Star" when verifying the Favorite Stitc

By Sharron Brittingham ·

New User software question 9

I bought a MC12000 4 years ago and I'm just now finding the time to learn the embroidery part of the machine. When I purchased the machine I received a cd with the horizon link software on it and rece

By sewperfectdraperies@... ·

Can needle center position be adjusted by dealer? 5

I was using the HP plate and foot on my new 9450 the other day and noticed the needle was a little out of alignment with the foot. It was about .5-1 mm to the left of center, not enough to hit the foo

By Pixey ·

Saving Dl'd designs to the embf file 6

Due to a move, I have not touched my embroidery machine for many months. I have set my e500 up and Dl'd a couple of new designs from a reliable online source I have used for years. I have successfully

By Kathy Strabel ·

Bobbin Winding Question 7

Hello Again! My MC10000 has decided to intermittently wind bobbins. It will wind for 'x' amount of time, then it sounds as if the motor is still going, but the bobbin has stopped turning. Suggestions?

By Sissy Costello ·

Twin Wing Needle question 3

I wonder if it is possible to do double Hemstitch in my 15000 with a Twin wing needle. It is the Schmetz ZWIHO 180/705H I would appreciate any coments MARIE Enviado desde Yahoo Mail para iPad

By MARIE ·

Bobbin Question 9

Hello All! Crazy new Janome convert here. I have a box of the Fil-Tec CG15L bobbins that came with my MC10000. Are these also compatible with my new-to-me 500e? Yes.... It escalated quickly from the 1

By Sissy Costello ·

Message to raise presser foot 3

I just got my 15000 back from the local dealer. I was getting the 'raise presser foot and needle bar and turn machine on again' or something like that. I plugged it in and turned on and the same messa

By Donna Goldbeck ·

The Sound of Silence 7

I haven’t received any messages in a while. Helen Knowledge is limited. Imagination encircles the world. Albert Einstein [Title and editing courtesy of your humble moderator Sometimes it's just like t

By Helen Aarness ·

Footbook 21

Will the new Bilevel Topstitch Foot be added to the Footbook? No rush, I purchased the foot for my Janome 15,000 and wondered if it would be added. Thank you! Cindy

By Cynthia Dickerson ·

onlinesewing-janome] The Sound of Silence 2

Not afraid…busy…lol. School is out and ‘Nana’ is busy all day with grand and great grandchildren, Yorkies, amputee hubby, house, yard, meetings, etc., so can’t even sew the remaining 9 horizontal seam

By Cat - N ·

Bobbin holders 17

Jim, I have written before about my yellow dot bobbin holder jumping out of position when I do an embroidery project on my 15000. I change needles, it's threaded correctly, no burrs in the holder beca

By Janet Gronski ·

MC10001 - black screen??? 5

I know this is a very old machine, so I'm hoping there is an answer for this. The only problems I've had have been user errors. However, this morning, when I turned it on, the screen didn't open up. J

By Mary ·

HP2 question 5

I recently traded in my S9 for a 9450 sewing machine so I would not have to transport my 15000 out for my Ruler Work group. Even though I had figured out a pretty good way to transport it, I was not t

By Pixey ·

AcuEdit & 15000 50

Hi Fiona, I am stating a new thread on your problem with sending a design to your 15000 and have pasted your original message below. I know when I get in a hurry or frustrated, I sometimes overlook st

By Pixey ·

MBX 5.5 Design Palette 3

Hello all I need some help! I seem to have lost my Design Palette which is usually placed at the bottom of the screen. I do have what appears to be part of the palette on the left side of the screen b

By Betty S ·

Edge to edge quilting on the 500e 7

I am working on a twin sized quilt. I understand how to set up the machine and how to hoop my quilt sandwich, but I cannot figure out how to keep the bulk of the quilt off the embroidery arm when I am

By Roberta K ·

11000 Janome=embroidery arm not moving into position to embroider 2

How do I move the embroidery arm into position to embroider? It seems to be stuck.

By pegijane39@... ·