|
Question about 550E 12 messages
For those of you who have the 550E, I've been looking at it and am just wondering how well it works for quilting. I have the 12000 and do a lot of quilting on it, but am thinking I might like to have
|
For those of you who have the 550E, I've been looking at it and am just wondering how well it works for quilting. I have the 12000 and do a lot of quilting on it, but am thinking I might like to have
|
By J Fraker
·
|
|
USB A 3.0 extender doesn’t work 3 messages
Jim or anyone who can help, Based on your helpful suggestion, I purchase a USB A 3.0 extender. When I plug it into my 15000 and then plug in my Thumb drive, the machine doesn’t recognize that anything
|
Jim or anyone who can help, Based on your helpful suggestion, I purchase a USB A 3.0 extender. When I plug it into my 15000 and then plug in my Thumb drive, the machine doesn’t recognize that anything
|
By TC Wiley
·
|
|
Horizon Link Cable 3 messages
Hi Jim, I have reorganised my sewing room and the cable and usb extenders are no longer long enough to connect PC to MC12000. Husband has bought a 10m extension and I can only get it to transfer desig
|
Hi Jim, I have reorganised my sewing room and the cable and usb extenders are no longer long enough to connect PC to MC12000. Husband has bought a 10m extension and I can only get it to transfer desig
|
By Lynne Dean
·
|
|
To Stitch Buddy 4 messages
Jim, Where can I get good instr on using the Stitch Buddy. I have it on my ipad & linked tomy pc where my designs are. I need directions on how to access my designs to work with them. I have the trail
|
Jim, Where can I get good instr on using the Stitch Buddy. I have it on my ipad & linked tomy pc where my designs are. I need directions on how to access my designs to work with them. I have the trail
|
By Shirley Allen
·
|
|
Accu-Feed Foot VD 4 messages
Hello Group Members--- I have a Janome Skyline 7 and use the narrow Accuf-Feed foot VD. However, the hook that keeps the foot engaged is always slipping out of the slot as I sew along. I mean, almost
|
Hello Group Members--- I have a Janome Skyline 7 and use the narrow Accuf-Feed foot VD. However, the hook that keeps the foot engaged is always slipping out of the slot as I sew along. I mean, almost
|
By Kathy Strabel
·
|
|
See machine message 7 messages
After three week in shop for this problem it returned the second time I plugged in and turned it on. Please help. Thanks
|
After three week in shop for this problem it returned the second time I plugged in and turned it on. Please help. Thanks
|
By Mary Jo Hirsch
·
|
|
Embroidery with Fine Thread 4 messages
I digitized a simple stippling design and tried to stitch it out on a quilt sandwich using So Fine thread from Superior threads. My machine will stitch for a bit, then either I will get a thread nest
|
I digitized a simple stippling design and tried to stitch it out on a quilt sandwich using So Fine thread from Superior threads. My machine will stitch for a bit, then either I will get a thread nest
|
By J Fraker
·
|
|
stitches screen 14 messages
I am unable to get anything but 1 page of utility stitches and 1 page of quilt stitches. This machine is new to me, friend passed and left it to me. I have read the manual and I'm lost! MC15000. It wo
|
I am unable to get anything but 1 page of utility stitches and 1 page of quilt stitches. This machine is new to me, friend passed and left it to me. I have read the manual and I'm lost! MC15000. It wo
|
By embrdr247@...
·
|
|
I-pad 2 messages
Will the Apple I Pad 7th generation work with the Janome 15000?
|
Will the Apple I Pad 7th generation work with the Janome 15000?
|
By Wendy Petit
·
|
|
Please see picture below 2 messages
After 3 weeks in shop for this problem the second time I plugged it in and turned it on. I have tried several times to follow the screen it is not resolved. Thanks for any help.
|
After 3 weeks in shop for this problem the second time I plugged it in and turned it on. I have tried several times to follow the screen it is not resolved. Thanks for any help.
|
By Mary Jo Hirsch
·
|
|
MBX Question - How Designs Load into MBX software 3 messages
Thanks Favy, I didn’t realize that we had the choice of loading designs into the software “ungrouped”. I just thought that it was a “new” feature and that we needed to ungroup once we had messed aroun
|
Thanks Favy, I didn’t realize that we had the choice of loading designs into the software “ungrouped”. I just thought that it was a “new” feature and that we needed to ungroup once we had messed aroun
|
By Cheryl Paul
·
|
|
janome 500e error message 3 messages
Hello, my brand new Janome 500e has an error message. this is my first time using this new machine. The yellow bar, error message in the window is: Raise Presser Foot and Needle Bar, then turn power o
|
Hello, my brand new Janome 500e has an error message. this is my first time using this new machine. The yellow bar, error message in the window is: Raise Presser Foot and Needle Bar, then turn power o
|
By Janet Cicerano
·
|
|
MBX Question 8 messages
Can anyone help me with this problem? I am using MBX. When I open a purchased design, if I want to use the Ambiance Quilting tool to quilt a 1/4" outline around the design, I set it up, but it's like
|
Can anyone help me with this problem? I am using MBX. When I open a purchased design, if I want to use the Ambiance Quilting tool to quilt a 1/4" outline around the design, I set it up, but it's like
|
By J Fraker
·
|
|
Installing Horizon Link on new computer 5 messages
Hi Jim, I just got a new computer and want to know how I get Horizon Link to install on the new one. I'm not sure were to go. Evy
|
Hi Jim, I just got a new computer and want to know how I get Horizon Link to install on the new one. I'm not sure were to go. Evy
|
By Evy Van Tiem
·
|
|
Updating to Windows 10 4 messages
Jim I want to update to Windows 10 from Windows 7. Now I have two embroidery machines, the 11,000 and 12,000. How do I go about updating the software for the machines? This all scares me to death. I d
|
Jim I want to update to Windows 10 from Windows 7. Now I have two embroidery machines, the 11,000 and 12,000. How do I go about updating the software for the machines? This all scares me to death. I d
|
By cnystul in Mn.
·
|
|
BX font? 4 messages
Is there a software that can change a font’s format to BX? I am loving Embrilliance as it is so much easier to do wording than importing one letter at a time. I have lots of other fonts but most do no
|
Is there a software that can change a font’s format to BX? I am loving Embrilliance as it is so much easier to do wording than importing one letter at a time. I have lots of other fonts but most do no
|
By Joyce Daniel
·
|
|
Threadbook 4 messages
_.Hi Jim – I’ve downloaded your threadbook app and have listed a lot of my embroidery threads into the lists. I’m trying to list my pearl cotton threads and was wondering if I can make a list of my ow
|
_.Hi Jim – I’ve downloaded your threadbook app and have listed a lot of my embroidery threads into the lists. I’m trying to list my pearl cotton threads and was wondering if I can make a list of my ow
|
By Sharon Simmons
·
|
|
Windows 7 one more time...Please 4 messages
I am not computer savvy, computer diagnosis send me over the wall, and cloud boxes is where you store rainwater.. Would some one please in simple step order tell me how to get embroidery designs to wo
|
I am not computer savvy, computer diagnosis send me over the wall, and cloud boxes is where you store rainwater.. Would some one please in simple step order tell me how to get embroidery designs to wo
|
By Vicky McEwen
·
|
|
USB 8 messages
I apologize, I do have one more question. When we remove the USB from our Janome machines, are they any steps? Can we remove it when the machine is turned on? Should we turn the machine off first? Do
|
I apologize, I do have one more question. When we remove the USB from our Janome machines, are they any steps? Can we remove it when the machine is turned on? Should we turn the machine off first? Do
|
By Cynthia Dickerson
·
|
|
My 550e 4 messages
Another question about my new machine. This hasn’t happened yet but I’m sure will at some point. If I have to leave half way through sewing out a design and turn the machine off. When I return will it
|
Another question about my new machine. This hasn’t happened yet but I’m sure will at some point. If I have to leave half way through sewing out a design and turn the machine off. When I return will it
|
By bhoryn
·
|
