Greetings: Someone with some machine repair experience might be able to answer this: I will skip the frustrating details, but let's just say that I picked up my machine from a repair and when I got it

Looking for feedback for this item. Thinking of purchasing it. https://www.graceframe.com/en/accessories/luminess

My 10000 bobbin winding is similar to Kathy Strabel's issues except mine goes a few steps further. When winding the bobbin the needle bar goes up & down (really fast) the whole time it is winding. Whi

After the installation of the Quiltmaker upgrade, the machine won't stitch if I use the automatic needle threader. It acts like the presser foot is down making the thread tight. Any fix for this???

Greeting to Janome users----My question is about bobbin winding on my Skyline 7 model. The bobbin winding process goes fairly well except for one thing: I do slide the bobbin-winding post to the right

Jim I have two machines, 11000 and 12000. I need to update to Windows 10. Will I be able to transfer the software over, or what will I have to do? I'm scared to death to make this switch. Please any s

In my neighborhood I am "that guy" that people go to with technical problems. I don't usually mind, and if I get pulled in early enough I can usually avoid protracted efforts to help. Recently my next

I tried to update to V2.10. My S9 is on V1.0. I formatted the flash drive, d/l the update to it, turned the machine off, then pressed down the up/down key and stop key, while turning my machine back o

I recently saw a video of a woman showing an alternate way to wind a Janome bobbin that always comes out even. I must say that even though I could embroider the Mona Lisa on my Janome e500,and I make

My friend has a Janome 14000 and was doing a fairly simple ITH appliqué on a t-shirt for her grandson. When she was attaching the hoop to the embroidery arm, the black, plastic, ‘locking knob’ broke o

I’m currently running Digitizer 5 on Windows7. Desperately need new laptop as program runs very slowly. As much as I’d like to purchase a MAC, I feel I’m safer running it on PC. Looking for advice on

I would like to embroider a school name on the front of a tshirt that is of the slicky ltwt knit sportswear fabric. Like you would wear to exercise class. Any suggestions for stabilizers top/bottom/et

Checked Janome's website for info on bobbin speed (rpms). All I found was that Janome bobbins should be wound on med speed. Being that each machine is different, my question is: On machines with numbe

L size bobbins are not as tall when you set them on your sewing table/desk, as the Class 15 (also known as Size A like Jim said) bobbins. Janome machines are made with a deeper area for the bobbin and

I have had my 15000 for 5 years and I love it. I have been using size L pre wound bobbins for embroidery and have been pretty lucky. Occasionally a bobbin acts up and that one goes in the garbage. I r

Is there a way to purchase the 9mm foot for quilt binding set seperate from set. I have the 7mm foot. Would like to have both. Thanks for any help.

Does anyone know if it’s possible to purchase a quilt binding set foot separate from whole set, such as 9mm foot instead of 7mm foot? Any help would be appreciated. Thank you.

Hi all Has anyone had a problem with excess oil dripping onto embroidery after servicing? Had my Janome 15000 back from shop on Monday, used it today for the first time since it’s service and I have h

Does Janome have an equivalent foot to Bernina’s #71 Lap seam foot? I have seen the lap seam for used to sew on binding and would like to find a Janome foot like it. thank you.

I have a Janome 15000. Recently when I am sewing a picture of the foot petal comes up on the screen with a warning message and the machine stops. I prefer to use the foot petal to stop and start my ma