I had been running Digitizer MBX5 on my Mac with Parallels running Windows. This has worked well for years but recently my hard drive crashed and I can't get the software reinstalled. I'm thinking abo

Needle fell out while embroidering. Didn't break. Just stopped the bobbin case from moving. No damage to bobbin case. Now it's out of calibration. Book does not say how to recalibrate it. Any help wou

I've found these feet and stitch plate for Janome 15000 and I don't know what they are for. The feet are QR, & PD-H. The plate has 3 holes and I'm not sure what this is for. I have a single hole plate

Use to, I could pop my usb into my 12000 and the correct folder for designs would just “show up”. For some reason this is no longer happening so I can not load designs into it to embroider. Is there s

Hello all, My Janome 500e has been idle and covered with its plastic cover for 1 full year. Should I consider oiling it or any other precautionary care before starting her up? Thanks. Janet

We are moving in a couple of months and I've been packing up my sewing room. I don't intend to have the movers move my machine but will transport it ourselves. I put it in the hard sided case I purcha

I own a 15000 which I am very happy with. Just lately I have seen some attachments which interest me like a binder and a zipper but these appear to br screwed onto the throat plate but I cannot see a

Someone, a few weeks ago, mentioned that purchased website designs can be downloaded to a MAC computer and transferred to a USB stick. I prefer working on my MAC rather than my PC since I look for des

Hi all, Can anyone here tell me if there is a yellow-dot bobbin case available for the MC11000se? And if so, what is the part number? It would be great if I could find one so I don’t have to mess with

After many years of using the AcuDesign with my 15K I can no longer send designs via wifi to my machine. Lost the connectivity. When I try to send, the circle keeps going around and I can't access my

I bought a used 6600 P without feet. I would like to find an even feed foot for the 6600. Thank you in advance Martie mjdutro@...

I am hoping I can find some assistance from this fantastic group. I went to do some quilting earlier in the week and my touchscreen was frozen. I cannot make any changes. Has anyone had this happen be

OK, Now I have a question for all of your. Can you use 4 needles to do a flat lock seam? I thought the whole purpose of flat lock was to have the fabric lay “flat”. If you are using 4 threads, I can’t

Hi everyone I am new to here.. I have a question I have a MB7 everytime I upload a design it makes a square around it. How do I stop that from happening.. so frustrated

I’d love to subscribe to the Janome S9 group! Linda

So, now that Aol and I had a conversation please re-connect me. Lets see if they will keep their hands off this time? Thanks, carol spoelstra

Here is a photo of me trying to get wide flatlock stitch. Can anyone tell me what I'm doing wrong? Sent via the Samsung Galaxy S® 6, an AT&T 4G LTE smartphone Get Outlook for Android

Try stiffening the organza with some liquified water-soluble stabilizer scraps. I think because the organza is limp/wimpy is part of the reason you are having issues. Try increasing your lower looper

Good Evening Everyone: As I continue my journey to mastering or getting better at my little serger, I have a question. I’m trying to do a 3 thread “wide” flatlock stitch. Last time I did this stitch,

Hi my friend is an owner of the 9400 and she is having trouble when free motioning and the top thread shows on the bottom. I have told her different size needle. Anyone have any good advice? Thanks fo