I seem to be doing something wrong but can't figure out what it is. My tension seems fine for regular sewing. When I try to use the hand-look stitches with Superior's Mono poly on the top and anywhere

Nancy, I have both high shank and low shank "feet" for my Janome machines. My low shank machines are 5mm and 7mm while my high shank is 9mm. I can use my 5mm & 7mm accessory feet that do not have a "s

I appreciate all the help I have received from this group about my new embroidery machine. I have sewn out a couple of designs and found in a couple cases that the automatic threader can not be used w

Very basic question here, but I can’t find the answer . Is my 15000 a high shank or low shank? Thanks you in advance, Maria Morrow

I found the group i was told would be a great help with my Janome. Too late my girl is in lock down in a repair shop. I have masks to make for nurses. I was surprised not to find an answer in the manu

Hello, Group! I have read several massages that the bobbin winding on some machines is less than satisfactory. I have found that my bobbins were winding unevenly on my MC500 machine. After eliminating

Hello--Group--I hope all are being safe and healthy as we wait out the pandemic. I wrote in a couple weeks ago about some thread breakage and the MC500e machine not telling me there was a thread break

My daughter is a Pharmacist on the Navajo Reservation, and they are in need of masks. They must be pleated, with a pocket for a filter, and have ties- no elastic. The masks must be mailed, but DO NOT

Here is the info weneedmasks.org Sewing angels needed

Hi Jim, I have purchased my first MacBook Pro and have been watching YouTube videos on installing VMware Fusion and Windows 10 so I can install Digitizer. I came across a video that mentioned VirtualB

How do i sew 2 1/2 strips that are cut using shears? It appears that I would measure from the tip of the triangle Janet

I wouldn’t want someone to have used a home made mask that wasn’t designed to specifications to come down with the virus. There are people around that would hunt you down and could sue you for making

When I put the HP plate in and turn the machine back on I only see the HP view with only 4 stitche available and a picture of the old HP foot and I cannot move the needle to the right hand side.: Is t

Is there any way to import a design that has been save in jef format into accufil to be used as a quilt design. My accufil says it will only open jpx files

Earlier this year I started an embroidery appliqué project with a friend who has Viking machines. I did several blocks on her Viiking machine. I also received all the files in .jef format. I figured o

Dear Jim, I just unboxed a brand new Janome 9450 and unfortunately the message please raise needle bar slowly came up. Sounds simple but the needle bar knob only moves a tiny, tiny bit and than is sol

Jim, I just got my machine back from the dealer last week for its regular maintenance., I did some embroidery work, all was fine. Then I switch to regular sewing and needed to wind a bobbin, and the i

Hello Group! OK, I am keeping busy in my workroom, sewing swimwear for when the weather turns nicer. Things are going OK, but I must express my exasperation --once again--with something with the Janom

JIm Bought a Foot Book when I was using windows 7, have up to windows 10. Would like to put it on the 10 using the app, need information. Inna