Doing a google search and our conversation/thread is posted to the internet world. How did this happen again? Attached is the link from the search. It happened once before several years ago. Up until

I received my software for AcuStitch in the mail. It was listed as Updated. My version is a 1.10 and the upgrade on the Janome Corporate Information says that the upgrade is a 2.10. Can I upgrade this

I have been embroidering a quilt--edge 2 edge. When I turned on my 15000QM I got a message on the screen: "PLEASE REMOVE HOOP. KEEP HANDS CLEAR. CARRIAGE WILL NOW MOVE TO HOME POSITION". Another messa

How do I enlarge/elongate, for example, satin stitches, to use with twin needles? I have the 15000, but previously had a Viking DSE, & used "longer" designs as borders on baby bibs. The Horizon stitch

How do I enlarge/elongate, for example, satin stitches, to use with twin needles? I have the 15000, but previously had a Viking DSE, & used "longer" designs as borders on baby bibs. The Horizon stitch

Back in March of 2021 I upgraded my MC15000 to Quiltmaker 3.0, but at that time because of hardware issues I did not upgrade my Horizon Link Suite to 1.31...I still have that original email with the s

Hi Jim, Do you happen to have access to the service manual for a MC 8000. My machine is missing the needle threader pin. sewing parts online.com has a part #627170106 that they says will fit. Deborah

Hi, Made a flannel blanket today. Instead of just doing a straight stitch around the edges, I thought I would use the decorative stitch #80 or #85. Tension was not equal on both sides of fabric on the

I have never used Acustitch but from what the update letter stated (or the site), since I have the 15000 updated, I should have it. I've never been able to find it but did the update hoping it would h

I have used a wing needle several times and am going to order a couple of new ones. The largest I have used before is a 4.0 mm. I see they come in 6mm and 8mm as well. Would those be able to be used i

Siri Siri play she’s gone

I am getting confused when your talking about updates. Are all of the updates for the Continental M7 or are some for the Janome 15,000. i can't believe that we can't update Stitch composer. Geez, they

For those who use/know about the Janome Artistic Edge cutter… I used to use a 48” vinyl cutter and buying vinyl was pretty straight forward for those commercial machines. There weren’t lots of manufac

Hi does anyone know what has happened to Janome.com. I live in the UK and can't seem to access it anymore for the support pages and software updates etc

I know there has been a lot of concern with the release of the M17 about the loss of the 15000 and free arm capabilities. And I knew that Janome had bought out/merged with Elna and a few group members

All -- I've been using a Rowenta Pro Steam Station for several years. It puts out lots of steam and holds 32 ounces of water, but it leaves drops of water all over the fabric. I've had a sudden burst

I'm starting to get that buzz sound and the raise presser foot and needle bar, turn power on again. It's done it occasionally since I've had the machine but now if I put the straight stitch plate in a

I have a friend who has an 11000. She has been trying to bring 2 different Embroidery Library designs in to her machine off a usb stick in the EMBF folder. It tells her the design is no good. I know n

Jim and Diane are incredibly remarkable people. Read what they have done! They step up in honesty and also create the future in apps, there are so many more contributions they have given. I can't even

Had computer on for some issues. My files are all on, but my program are gone. I have my machine v 3 (quiltmaker). No link on computer. Do I need to install the original horizon likely disk ? Contact