I can't remember what the cause of getting the message that you need to raise presser foot and needle bar and then turn machine on again. I'm getting the message on my 15000 and my granddaughter is ge

My 15000 has developed a new problem in the last few days. The thread will randomly come out of the take up lever. I'm very careful make sure it's seating in the lever completely but that doesn't seem

I have an old Memory Craft 9000 that has worked beautifully since the early 1990’s. I’ve recently replaced the sewing functionality with an M7 and planned to keep the 9000 for embroidery for a few mor

I started to use my STD foot for the first time. It is in the Acufed section of our foot box so I assumed it used the HP needle plate which I put on and the HP sewing choices came up on my sewing mach

Good morning, Janome folks--- I use a thumb drive to transfer designs from the computer to the machine. The thumb drive I have been using for a couple of years is getting a little wonky. That is, it s

Hi all I am desperate. I have 9 projects for Christmas that all need buttonholes and I can't get my 15000 to do them. It kept giving me the error message "pull down buttonhole lever" but the button ho

I am trying to embroider on my Elna860(same as Janome9900) when I start the embroidery, the machine stutters, I get an error message, and it will not sew. the error message is "is anything stuck in ma

Good morning I've found a 350E originally purchased in 2007. It's had very little use, I originally was wanting one of the more expensive Janome embroidery machines but just can't afford it right now.

jef format has been recognized by Bernina Embroidery Software 8 since the software was updated to 8.2 in earl 2019. For those not liking Janome Artistic Digitizer, the Bernina software is a great opti

So since machines are in short supply, my local dealer is offering some good holiday sales on sewing/embroidery accessory bundles. I got an Accuquilt Go bundle yesterday…Merry Christmas to me! One of

This is Madeira poly thread. I've not had a problem like this before. Luckily I spotted it when I opened the door to do a thread change during embroidery but it was headed for the needle. The thread n

Hello I’m hoping someone can help. The needle stitches are looping intermittently on the back of the fabric. I have changed the needle several times. I use good needles I only use gutermann thread I’v

The following photos have been uploaded to the Ceil's thread shred album of the onlinesewing-janome@groups.io group. IMG-3021.jpg By: Ceil J <cjancola@...>

Does anyone know how to remove the tension cover for the Janome 15,000 Quilt Maker. I have the repair manual but it just shows how to remove the older version. Something is catching my thread in there

I want to do some kitchen towels to sell does anybody have a good place they buy from.. I don’t want to get junk towels.

I've heard it said that every other generation of Windows is bad. Now that Windows 11 is out, has anybody got it and has it affected your embroidery software? Since I thought Windows 7 was good, v8 ba

I have noticed that all the videos for the DIME Weightless Quilter are done on embroidery machines with hoops driven from the side. Has anyone used it with a 15000 and if so, are there any issues with

Greetings Jim, I live in Houston and I have a problem... I purchased the MC 15000 in 2015 at International Quilt Festival. The computer that I downloaded the Horizon Link Suite has died and I have pur

I'm going to be updating to Windows 10. I'm wondering with my software for my 12000 and 11000 will I be having problems with them installing on my computer? Is there anything I should be doing in adva

For some reason I think Apple Macs work with the 15000 and horizon suite that came with my machine. After doing some reading tonight, I am confused. Does the MAC WiFi to the machine? Is there an advan