Good morning-- I have a Janome S7 sew-only machine. It has the 9mm wide stitch width and the stitch length can be adjusted up to 5. However, I find that the length of 5 is not long enough for basting

I have an MC10001 and am trying to get it up and running. I realize this machine is very old but I have used it from time to time for sewing as a backup. Well, when I turn it on, I’m getting a message

This "Thank You" is late but in no way means any less. I have been following the help subjects Jim and all of you wonderful ladies sent to me trying to help me. I have been busy trying to fix this inc

Hi does anyone here own the software for the Digitizer Jr and are having a problem to accessing it to use it? I have tried everything to correct the use of the dongle but keep getting 'Unable to acces

Upgrade for 15000

How do I get horizon link for the 12000 on my new computer without being able to insert the original cd for it. Help please

Will I have an issue with my 11000p if I go from windows 10 to 11 on my computer? I do not have digitizer.

Jim I have Janome 12000 and 11000. I'm going to update to Windows 10. I have Windows 7 right now. I'm scared to do this in fear something is not going to work. Have you got any ideas in what is not go

Morning, My 15000 bobbin case spins around, pops up the plate, which causes a big jam. I took this in for service and it did the same thing again. Why does this do this? Can't seem to get an answer. I

I am currently having problems winding bobbins. The needle mechanism does not fully disengage and the needle initially goes up and down very fast while the bobbin starts winding, then the needle stays

Hello Jim and other Mac users, My 2012 MacBook Pro needs to be replaced and I would like to purchase one of the new MacBook Pro's with an M2 chip that was announced this week. I currently use VMFusion

Updated to windows 11 from windows 10. My little flower icons for Janome are gone and I have a red & white blob in its place. Clicking on them will not open them. It says it is a digitizer stitch file

hi all can anyone tell me the name of this font please thanks zelda

Anyone have a suggestion for a decent sewing chair? Need rolling casters, easily adjustable seat height, preferably with a back rest. Been searching the internet but they are all over the map. Any and

Well we've managed to make it through another year. While not as devastating as the two preceding it, 2022 has not been a picnic in the park. Prices of everything have been soaring, particularly at th

Hello, I have been oiling my Janome 550e for the first time and I must say have found it to be quite a challenge! I am on the last leg and have taken the two screws out of the carriage arm but I can’t

Another question for anyone using MBX, I have to digitize a simple design and I need to use the blanket stitch motif #10 but the problem is, its an open line and I need the stitch to go on the inside

Dear Jim and Diane, et al, Merry Christmas and happy holidays to all. Thank you Jim and Diane for all you do for us. And thank you to all who give so willingly of their time . You are all appreciated.

Dear all, By learning about the extreme weather conditions these days in the US I hope you and your loved ones are sound and safe! Have a Merry Christmas and take some rest, Mattes

Hi, I don’t post very often however read the posts. I have had a 350, 500 and now 550E. I liked each machine however thought I was slowing down so decided to sell the first two. I really like the 550E