onlinesewing-janome@groups.io

Bad Board? 2

Does this sound like a bad board problem on my 15000? 1. For first time ever the machine would not read the USB; took it out, checked it in my computer, the designs were there. 2. Tried again and this

By Patricia Ward ·

Reading a file 3

Hi all today I have run into a real problem. My machine does not want to read a file that I have used many times. I have it on a thumb drive. I have taken Off some design files. I am truly frustrated.

By Kim Cotcher ·

In memoriam 9

A few months back I received an email from Maggie Cooper, owner of the immensely popular Digitizer Self-help group on Yahoo. There are a number of her posts on this list as well, as she answered any a

By onlinesewing@... ·

New presser feet 4

a friend passed on some never used presser feet for her older Jan0me40 — maybe an 8000? They do not snap onto the shank of my Janome 12000. They are too narrow. Does it make sense to purchase a differ

By Jeanne ·

presser foot is not working........... 3

I just changed into regular sewing mode and put on the correct foot but the machine will not lift the foot when I press the button (presser foot lifter button) I do not use the knee lifter. I have tur

By Gloria Lewis ·

Design doesn’t show up on jump drive 2

I have an in-the-hoop zipper bag design (from Sue O’Very) that I want to make. It shows up on the jump drive when I have it in my computer, but when I put the jump drive in my Janome 12000, it’s not t

By Lisa Powell ·

Bobbin question 12

I did read the thread about the bobbins with J on them so I started looking through mine. I have a million. Most are blank but I do have some that look similar to the J but they have a B on them. The

By Lorrie Gauthier ·

while embroidering machine stops after 10 stitches 2

Set up a new design and began stitching, but the stitching stops after about 10 stitches, then I need to push the start button again.. no message on the screen to indicated why..any suggestions?

By Lynda Lu Gibb ·

Janome 15000 cabinet 10

I'm looking for recommendations for a sewing cabinet for my 15000. I like the Horn 9000 but can't figure out if my Janome will fit? thanks, Caroline

By Caroline Wright ·

WiFi Connection 2

I picked up my machine from having service yesterday and the A board was replaced. When I set it up, I had to reconfigure the wifi settings. No problem. I did it as usual and got the notice that I was

By Gail ·

iron cleaning 11

I inadvertently touched a hot iron to polyester batting. Does anyone know how to remove the residue from my iron? I tried alcohol and Goo Gone. Neither had any effect.

By Sherryl Doran ·

Bobbin cases, now Pre-wound bobbins

The Janome packaged pre-wound bobbins can certainly be re-used when empty. However they are not the same as the 102-261-103 bobbins that are infused with rubber, and are stamped with a J on the stem.

By onlinesewing@... ·

Bobbin cases 17

I am quilting (a single run purchased design) on a table runner on the 15000 in embroidery mode. Using the red dot bobbin case, I did a test using the same top, batting and backing and the design look

By Carole O'Mara ·

Bobbin

I also use my empty prewound bobbins over & over. Never have a problem. JoAnn Life's biggest decision is what you do with Jesus. Narda, I use my Janome empty prewound bobbins over and over; that may h

By JoAnn Novak ·

Installing upgrade 5.5 with Version 5 already on computer

Hi, I am having a problem. I have version 5 MBX on my computer registered and activated already over a year. I purchased the upgrade to v 5.5 and it is coming back with an error no previous active sof

By rraffay@... ·

New Owner of a used Janome 6500 Memorycraft - March 2019 25

Just trying to connect with other sewers who have this machine. I'm a Quilter and purchased a "used" 6500 just 6 months ago. I had been using a computerized Kenmore - but it wasn't performing how I ne

By srd.sonborne@... ·

Help finding Janome Event on FB 7

I signed up for a Janome "event" on FB. The FB group it was on was the "Janome 15000 FB Virtual Guild." When the time for the event came, I could not find a way to access it. I know this is not exactl

By Pat ·

Tips to check automatic needle threader? 7

The automatic needle threader on my QuiltMaker 15000 has again stopped working. Last summer it stopped working after I was doing multiple thread changes on a project. Took it to the dealer and they en

By juliadlf.ny@... ·

Horizon Link Software - Microsoft Surface Pro4 12

Does anyone know if I can download the Horizon Link software to my Microsoft Surface Pro4? Or can you only download it to an Ipad. If I can, where would I find the app? Thanks so much! June

By June E Hudspeth ·

15000 tension help 3

my bobbin thread is not showing on bottom(back side) of my machine embroidering, the top thread shows on bottom (back side) How can I correct this. thankyou, Kathleen Murphy kmurphy1@...

By kmurphy1@bellsouth.net ·