Date
1 - 5 of 5
Can needle center position be adjusted by dealer?
|
Pixey
Great to know! Thanks Jim.
toggle quoted message
Show quoted text
On Aug 8, 2022, at 8:30 AM, Jim Stutsman via groups.io <onlinesewing@...> wrote:
|
|
|
|
It's actually a pretty easy adjustment that conceivably could be done while you wait.
|
|
|
|
Pixey
Thanks Favy!
toggle quoted message
Show quoted text
I will reach out to my dealer and see what the wait would be to get the adjustment done (and give him time to check his service manual). Pixey On Aug 8, 2022, at 7:44 AM, favymtz <favymtz@...> wrote:
|
|
|
|
favymtz
Yes, the tech can adjust where the needle falls. I had to have it adjusted on one of my machines. Favymtz I was using the HP plate and foot on my new 9450 the other day and noticed the needle was a little out of alignment with the foot. It was about .5-1 mm to the left of center, not enough to hit the foot or plate, but just enough to make lining up my seam a little more challenging. Unfortunately, the machine does not let me adjust the foot width position in that setting. Is that something a dealer could adjust? Or would it just be considered “within tolerance” and I need to compensate for it visually in my fabric placement? --
Favymtz |
|
|
|
Pixey
I was using the HP plate and foot on my new 9450 the other day and noticed the needle was a little out of alignment with the foot. It was about .5-1 mm to the left of center, not enough to hit the foot or plate, but just enough to make lining up my seam a little more challenging. Unfortunately, the machine does not let me adjust the foot width position in that setting. Is that something a dealer could adjust? Or would it just be considered “within tolerance” and I need to compensate for it visually in my fabric placement?
Pixey |
|
|