Date
1 - 3 of 3
Acufill quilting
|
KewelAunty
Is there any way I can make a stipple pattern in the acufill quilting program a little narrower? I reduced it by the 10% the program will allow, but I need it to be about a quarter of an inch narrower. I would appreciate any ideas on how to do this.
Thank you, Sandy |
|
|
|
Pam Davison
If I understand your question correctly, Anne (Janome Educator) just did a Facebook class today showing how to do that using Artistic Digitizer.
Sent from Mail for Windows
From: KewelAunty
Sent: Thursday, June 30, 2022 9:17 PM To: onlinesewing-janome@groups.io Subject: [onlinesewing-janome] Acufill quilting
Is there any way I can make a stipple pattern in the acufill quilting program a little narrower? I reduced it by the 10% the program will allow, but I need it to be about a quarter of an inch narrower. I would appreciate any ideas on
how to do this.
|
|
|
|
favymtz
Sandy, The Acufil program has limitations on how small of a 'block' of Acufil Stipple we can make. The smallest measurement that can be designed is 3.94 inches, and the largest block size is for the ASQ22 hoop Within that limitation you can design whatever size you want, and use the blocks to fill an area up to 129.92 inches. You can't adjust the spacing of the stipple, it's pre-set. If your question is how to adjust the spacing you'd need to do that in a digitizing program. Favymtz On Thu, Jun 30, 2022 at 8:17 PM KewelAunty <kewelaunty@...> wrote: Is there any way I can make a stipple pattern in the acufill quilting program a little narrower? I reduced it by the 10% the program will allow, but I need it to be about a quarter of an inch narrower. I would appreciate any ideas on how to do this. --
Favymtz |
|
|