15000 tension help


my bobbin thread is not showing on bottom(back side) of my machine embroidering, the top thread shows on bottom (back side)
How can I correct this.
Kathleen Murphy

Jim Stutsman

If you are using the yellow dot bobbin case, switch to the red dot (standard) case. You don't need the extra tension. If you are already using the red dot case, adjust the needle tension to be a little higher. When properly adjusted, you will see about 1/3 top thread on each side of a strip of 1/3 bobbin thread when viewing the back of the embroidery.


Thankyou, I will work on this today.